Anyone with OEM tweeters integration in A-Pillars ? (SEDAN) - Toyota Yaris Forums

mledez · 11-23-2008, 10:38 PM

Anyone with OEM tweeters integration in A-Pillars ? (SEDAN)
Hi,

I've found in some previous threads pictures of Tweeter integration in Canadian and Tailand models of HB... But I want to know if someone have pictures of SEDAN integration...

Something like this...

I'm currently running a pair of 6.5 and 6x9 Type-R Coaxs and Eclipse XA-4000 (125x4 @ 4ohm)... But I want to change my front stage, Focal Polyglass comps waiting because I don't have a good location for my tweets

I want to preserve the oem look, Ideas appreciated... Post your pics and don't look my english

MR. CANTON · 12-17-2008, 12:08 PM

The triangle pillars i took a knife and kept opening a hole till the tweeters fitted perfect
Back Dash 2 10" but i cut the metal to fit them below the original grilles (cant see it from outside look stock
Trunk - 2 12" in box
2 amps
capacitor and battery
but im moving my amps below the back rest of the back seat. i saw this guy on the forum did it realy neat
any questions message me

mikenacarato · 12-17-2008, 12:25 PM

im guessing probably not, but can the sedan a pillars with the tweeters fit the 3dr?

MR. CANTON · 12-17-2008, 12:35 PM

i doubt it

mledez · 12-17-2008, 12:37 PM

Quote:

Originally Posted by MR. CANTON

The triangle pillars i took a knife and kept opening a hole till the tweeters fitted perfect
Back Dash 2 10" but i cut the metal to fit them below the original grilles (cant see it from outside look stock
Trunk - 2 12" in box
2 amps
capacitor and battery
but im moving my amps below the back rest of the back seat. i saw this guy on the forum did it realy neat
any questions message me

Very nice pictures. The tweeters look very nice. I'm the guy with amps installed hidden in the back seat.

I just used the stock plastic cover and using a pencil draw the figure in a 9mm MDF sheet. Then joint the moving parts with mini hinges (Used for cabinets in kitchen).

If you want I cant take more pictures, because I currently have the mdf board outside of the car (I'm installing some Rockford Deadskin)

mledez · 12-17-2008, 12:39 PM

Quote:

Originally Posted by mikenacarato

im guessing probably not, but can the sedan a pillars with the tweeters fit the 3dr?

Actually, We (Sedan owners) are F*** because the picture is from a Hatch. So no tweeters for us.

You can see the interior of the hatch in Canada and Filipines and both include those tweeters. No sedan models

MR. CANTON · 12-17-2008, 12:43 PM

Quote:

Originally Posted by mledez

Very nice pictures. The tweeters look very nice. I'm the guy with amps installed hidden in the back seat.

I just used the stock plastic cover and using a pencil draw the figure in a 9mm MDF sheet. Then joint the moving parts with mini hinges (Used for cabinets in kitchen).

If you want I cant take more pictures, because I currently have the mdf board outside of the car (I'm installing some Rockford Deadskin)

yeah that would be sweet... some extra pics would help me figure outt how im doing it

mikenacarato · 12-17-2008, 04:31 PM

so i can get these from a canadian dealer for my 3dr?

IllusionX · 12-17-2008, 07:22 PM

Canadian's do not have the tweeters built in the Apillars.

here's my sedan

andruboz · 12-17-2008, 09:25 PM

quick question - whats the trick on removing a-pillar plastic cover? an installer was going to take my dash apart. but it must just snap out at the top, right?

IllusionX · 12-18-2008, 12:36 PM

yep.

give it a tap with your palm at the top of the pillar (near the roof). it should come out easily.

11-23-2008, 10:38 PM	#1
mledez Drives: Yaris Sedan '08 Join Date: Nov 2008 Location: Venezuela Posts: 12	Anyone with OEM tweeters integration in A-Pillars ? (SEDAN) Anyone with OEM tweeters integration in A-Pillars ? (SEDAN) Hi, I've found in some previous threads pictures of Tweeter integration in Canadian and Tailand models of HB... But I want to know if someone have pictures of SEDAN integration... Something like this... I'm currently running a pair of 6.5 and 6x9 Type-R Coaxs and Eclipse XA-4000 (125x4 @ 4ohm)... But I want to change my front stage, Focal Polyglass comps waiting because I don't have a good location for my tweets I want to preserve the oem look, Ideas appreciated... Post your pics and don't look my english

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM
Anyone with OEM tweeters integration in A-Pillars ? (SEDAN)	mledez	Cosmetic Modifications (Exterior/Interior)	2	11-24-2008 01:45 AM
Vit Emblem and Door Pillars on SEDAN	jamal1984	Cosmetic Modifications (Exterior/Interior)	33	11-07-2008 05:15 PM

12-17-2008, 12:25 PM	#3
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	im guessing probably not, but can the sedan a pillars with the tweeters fit the 3dr?

12-17-2008, 12:35 PM	#4
MR. CANTON View User's Garage Drives: Yaris Sedan Join Date: Mar 2007 Location: Trinidad Posts: 19	i doubt it

12-17-2008, 04:31 PM	#8
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	so i can get these from a canadian dealer for my 3dr?

12-17-2008, 07:22 PM	#9
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	Canadian's do not have the tweeters built in the Apillars. here's my sedan

12-17-2008, 09:25 PM	#10
andruboz boohachimono Drives: 07 hb Join Date: Oct 2008 Location: central texas Posts: 97	quick question - whats the trick on removing a-pillar plastic cover? an installer was going to take my dash apart. but it must just snap out at the top, right?

12-18-2008, 12:36 PM	#11
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	yep. give it a tap with your palm at the top of the pillar (near the roof). it should come out easily.