Changing Map Light Bulb - Toyota Yaris Forums

justin27zamora · 06-16-2013, 02:52 AM

I want to change my map lights bulb but there is no step-by-step instruction on the car's manual. Is there anyone who already change these? I don't want to change it without a correct instructions because it might broke something. Thanks in advance.

clarenceie · 06-19-2013, 12:22 AM

I assume this is a US Yaris 08-12. Pry one of the clear covers from the middle with a flathead screw driver. It takes T10/194/168 bulbs, pull out the bulb. push the new one in (polarity does not matter).
Let's assume u took out the driver's side. to put on the cover, u would slide in the left side of the cover first, then push the right side of the cover to lock it into the pegs.

RedRide · 06-19-2013, 12:07 PM

Clarenceie is correct. I would just add that you should be sure to pry the lens (cover) out "gently".

06-16-2013, 02:52 AM	#1
justin27zamora Drives: Toyota Vios 2012 Join Date: Jun 2013 Location: Philippines Posts: 3	Changing Map Light Bulb I want to change my map lights bulb but there is no step-by-step instruction on the car's manual. Is there anyone who already change these? I don't want to change it without a correct instructions because it might broke something. Thanks in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bulb Replacement Guide (led Sizes)	theFEVA	Cosmetic Modifications (Exterior/Interior)	113	02-28-2017 01:02 PM
Light bulb questions	Yaris_80	DIY / Maintenance / Service	4	07-16-2013 01:36 PM
Light Bulb Numbers For Interior Illumination	privateyeblckbx	Cosmetic Modifications (Exterior/Interior)	0	05-16-2010 05:59 AM
anyway of taking out the abs light bulb?	SweetRS	DIY / Maintenance / Service	2	03-13-2009 09:24 PM
MAP LIGHT	drell42	Cosmetic Modifications (Exterior/Interior)	2	05-21-2007 08:30 PM

06-19-2013, 12:22 AM	#2
clarenceie Drives: Yaris Sedan Join Date: Apr 2012 Location: So Cal Posts: 53	I assume this is a US Yaris 08-12. Pry one of the clear covers from the middle with a flathead screw driver. It takes T10/194/168 bulbs, pull out the bulb. push the new one in (polarity does not matter). Let's assume u took out the driver's side. to put on the cover, u would slide in the left side of the cover first, then push the right side of the cover to lock it into the pegs.

06-19-2013, 12:07 PM	#3
RedRide Drives: '09 Yaris carmine red 2d HB Join Date: Jun 2009 Location: Middletown, NY Posts: 1,502	Clarenceie is correct. I would just add that you should be sure to pry the lens (cover) out "gently".