Can we do this? (aka The DIY Cruise Control Thread)

[CTScott]

Originally Posted by Vince87

Thanks CTScott ! you always have the answer faster than anybody else... is there's a more straightfoward route to the fuse box than the grommet under the carpet on the passenger side (thats were the Pin40 and my amp wires a going to the engine bay) ?

ps. I thought that the white wire was a ground, thats why I believed I could ground it on the chassis instead...

You can go through the driver's side grommet, which goes in up behind the inside fuse panel and comes out just behind the battery.

White with a black stripe is always ground on the Yaris. Solid white is often 12 V power (which is the case with the wiring for the clutch switch).