Adding Automatic Locks - Toyota Yaris Forums

MrJester · 03-06-2007, 06:13 PM

Okay I purchased this kit

http://a1electric.com/Merchant2/merc...ode=W02C-B6000

I will be installing it prob tomorrow that is if it comes in like it is supposed to. I will be putting together a DIY. :)

ChinoCharles · 03-06-2007, 06:20 PM

Nice, I'll be watching!

MrJester · 03-06-2007, 11:03 PM

Parts left Hawthorne, CA at 7:05pm should have them sometime around lunch tomorrow so that is all good hopefully it is not an ALL day install. :)

TrancosRt · 03-06-2007, 11:19 PM

It's not hard to do. The longest thing was figuring out where to connect what once the locks where installed and the wiring done.

MrJester · 03-07-2007, 12:32 AM

Awesome so should be a fun install tomorrow. :) w00t w00t

MrJester · 03-07-2007, 10:35 AM

Sounds like you have done this install before was there any drilling or anything for the install???

TrancosRt · 03-08-2007, 11:37 PM

Yup, there's some driling: the cable holders and the guides where to attach the actuator.
One thing: You will have to remove a piece of foam from the door inner cover in other to close the door...

MrJester · 03-09-2007, 04:42 PM

Yeah I was figuring that much. I could have swore there were already holes where the actuator needs to be placed. I could be wrong though the install had to wait till this weekend cause I ran out of time and what not. I will be doing it maybe tomorrow.

blake111887 · 03-10-2007, 01:56 AM

cool ill be watching as well, been waitin for somethin like this. good luck

Black Yaris · 03-10-2007, 01:59 AM

ya'll get one of those solenoids to work on the hatch?

TrancosRt · 03-10-2007, 03:13 AM

The solenoid is the only thing to do. But I'm leaving that part of the install until I get the crash fixed. No special reason really, but my spare time is kinda limited...

jetaimejsc · 04-30-2007, 01:45 PM

so whats the news on this, was it hard and any pics, i want to install it on my lift back but i dont know how, so help would be appreciated

ChinoCharles · 04-30-2007, 04:18 PM

I'm guessing if it wasn't hard we'd have seen it already.

MrJester · 04-30-2007, 04:29 PM

Yeah turned into a pain in my ass but after looking at this I am going to try it again. Let me say I have never done any kind of work like this before. I am a computer guy :). So check out this link
http://www.a1electric.com/cablelock.htm

After looking that over I think I can do it so check that out.

blacksan · 04-30-2007, 05:57 PM

MrJester,

If I was not located on the western end of the state (Shenandoah Valley) I would give you a hand with the installation. So, any good events in the VA Beach area this summer?

Later,
blacksan

V8TITAN · 06-08-2007, 02:02 AM

wow i got jipped... i paid a shop 1400 to do that and electric windows and they SUCK

03-06-2007, 06:13 PM	#1
MrJester View User's Garage Drives: homo Join Date: Feb 2007 Location: Homo Posts: 149	Adding Automatic Locks Okay I purchased this kit http://a1electric.com/Merchant2/merc...ode=W02C-B6000 I will be installing it prob tomorrow that is if it comes in like it is supposed to. I will be putting together a DIY. :)

03-10-2007, 01:59 AM	#10
Black Yaris der Zeck View User's Garage Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006 Location: Toledo, OH Posts: 5,231	ya'll get one of those solenoids to work on the hatch? __________________

06-08-2007, 02:02 AM	#16
V8TITAN Drives: 07 nissan titan, 07 yaris Join Date: Jun 2007 Location: tampa fl Posts: 45	wow i got jipped... i paid a shop 1400 to do that and electric windows and they SUCK __________________ 2007 TITAN SE fram boost intake, or,bt,cc,rf and other cool gismos.. sisters 2007 toyota yaris, bone stock.. [IMG]http://i8

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Automatic Choke Stuck	Rua	General Yaris / Vitz Discussion	9	02-22-2007 07:57 PM
5spd vs automatic	m-arco	General Yaris / Vitz Discussion	16	12-14-2006 06:32 PM
power locks and alarm install	acrbill	In Car Entertainment + Electronics (audio / video / alarm)	1	12-01-2006 01:17 AM
door locks	flip_yaris	Cosmetic Modifications (Exterior/Interior)	6	10-24-2006 06:54 PM
adding DRL's..??	static808	DIY / Maintenance / Service	9	10-20-2006 05:15 AM

03-06-2007, 06:20 PM	#2
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Nice, I'll be watching!

03-06-2007, 11:03 PM	#3
MrJester View User's Garage Drives: homo Join Date: Feb 2007 Location: Homo Posts: 149	Parts left Hawthorne, CA at 7:05pm should have them sometime around lunch tomorrow so that is all good hopefully it is not an ALL day install. :)

03-06-2007, 11:19 PM	#4
TrancosRt View User's Garage Drives: 07 Silver HB Yaris Join Date: Jul 2006 Location: S Florida Posts: 289	It's not hard to do. The longest thing was figuring out where to connect what once the locks where installed and the wiring done.

03-07-2007, 12:32 AM	#5
MrJester View User's Garage Drives: homo Join Date: Feb 2007 Location: Homo Posts: 149	Awesome so should be a fun install tomorrow. :) w00t w00t

03-07-2007, 10:35 AM	#6
MrJester View User's Garage Drives: homo Join Date: Feb 2007 Location: Homo Posts: 149	Sounds like you have done this install before was there any drilling or anything for the install???

03-08-2007, 11:37 PM	#7
TrancosRt View User's Garage Drives: 07 Silver HB Yaris Join Date: Jul 2006 Location: S Florida Posts: 289	Yup, there's some driling: the cable holders and the guides where to attach the actuator. One thing: You will have to remove a piece of foam from the door inner cover in other to close the door...

03-09-2007, 04:42 PM	#8
MrJester View User's Garage Drives: homo Join Date: Feb 2007 Location: Homo Posts: 149	Yeah I was figuring that much. I could have swore there were already holes where the actuator needs to be placed. I could be wrong though the install had to wait till this weekend cause I ran out of time and what not. I will be doing it maybe tomorrow.

03-10-2007, 01:56 AM	#9
blake111887 Yarisonater View User's Garage Drives: NAUTICAL BLUE 07 YARIS SEDAN Join Date: Mar 2007 Location: South Amboy NJ Posts: 34	cool ill be watching as well, been waitin for somethin like this. good luck

03-10-2007, 03:13 AM	#11
TrancosRt View User's Garage Drives: 07 Silver HB Yaris Join Date: Jul 2006 Location: S Florida Posts: 289	The solenoid is the only thing to do. But I'm leaving that part of the install until I get the crash fixed. No special reason really, but my spare time is kinda limited...

04-30-2007, 01:45 PM	#12
jetaimejsc Drives: Yaris Hatchback Join Date: Apr 2007 Location: Bville, TN Posts: 212	so whats the news on this, was it hard and any pics, i want to install it on my lift back but i dont know how, so help would be appreciated

04-30-2007, 04:18 PM	#13
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	I'm guessing if it wasn't hard we'd have seen it already.

04-30-2007, 04:29 PM	#14
MrJester View User's Garage Drives: homo Join Date: Feb 2007 Location: Homo Posts: 149	Yeah turned into a pain in my ass but after looking at this I am going to try it again. Let me say I have never done any kind of work like this before. I am a computer guy :). So check out this link http://www.a1electric.com/cablelock.htm After looking that over I think I can do it so check that out.

04-30-2007, 05:57 PM	#15
blacksan Drives: 07 Bayou Blue Liftback Join Date: Apr 2007 Location: Virginia Posts: 1,121	MrJester, If I was not located on the western end of the state (Shenandoah Valley) I would give you a hand with the installation. So, any good events in the VA Beach area this summer? Later, blacksan