ordered Micro Image Short Throw - Page 2 - Toyota Yaris Forums

jpmck03 · 04-23-2012, 02:48 PM

Quote:

Originally Posted by DeathBeard

is this kit hard to install? any diy's?

Yes. See my sig...

jpmck03 · 04-23-2012, 05:06 PM

Quote:

Originally Posted by TOLMACH

courtesy of some king YW guys

http://www.yarisworld.com/forums/showthread.php?t=39144

I believe if you do not have 1/2 inch ratchet you can use a different one with required sockets ))

That's correct, whatever size driver you have should work as long as it's the right sized socket.

Golddeenoh · 04-23-2012, 06:52 PM

the hard part depends on if you get the bracket that Micro image can supply. the horseshoe clips on the OEM bracket are kind of a pain to get out, but once you get those out it only takes some time. if it was not for those clips it would have taken me less than an hour to install include removal of some parts that will be in the way.

Golddeenoh · 04-23-2012, 09:29 PM

about an hour and a half over all, i spent 45 minutes just trying to get those clip out. they are way easier going back in. if you have a dent puller(slide or slam hammer) that works great if you can get it under the edge and pop it a few times.

Spidermandud · 04-27-2012, 04:32 PM

Quote:

Originally Posted by EPyarisdriver

Soo I should be getting some serious power from these then huh..

Are you not? I'd think you'd easily be able to outrun anything with all those.

Golddeenoh · 04-27-2012, 10:06 PM

now for the fun part, getting to the tranny. :D

jpmck03 · 04-29-2012, 10:55 AM

Quote:

Originally Posted by TOLMACH

Overall install time- 2 hours .. if I have to do it again would probably take me 30 minutes

To remove the horseshow clips just used big flat screwdriver (20 seconds to remove both)

Congrats! And 20 seconds to remove those clips? Lucky! Mine took a bit longer, as they were really stuck on there.

Quote:

Originally Posted by TOLMACH

if anyone can see anything wrong with my installation (pic above), pls let me know

Looks good from here... get to go out and drive it yet?

cali yaris · 04-29-2012, 11:49 AM

GREAT picture showing the bracket install and orientation. Thanks for posting it.

Golddeenoh · 05-01-2012, 12:12 PM

I am so glad i put this in, I took my wife's dog to get fixed yesterday and it was nice to able to shift will the dog was laying across my arm.

1.5 · 05-01-2012, 01:49 PM

any field tests yet?

ijose 845 · 05-16-2012, 11:11 AM

i just ordered mine today

does it really make a difference?

cali yaris · 05-16-2012, 11:53 AM

^ Yes it does!

BEEF · 05-16-2012, 12:28 PM

I purchased the 3" extender and it shifted like a mack truck. I added the short throw shifter and it now shifts like it did at the stock height but at a much more comfortable position.

I am thinking seriously about getting the in-cabin one to go along with it.

it is worth the money, hands down.

ijose 845 · 05-18-2012, 05:13 PM

just got mine in today
i installed it however i coulent fit the washer on the top and the pin it is very tight in their i hope its okay
and would this damage anything or is it safe? because i really like the short shifts

04-29-2012, 11:49 AM	#26
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,857	GREAT picture showing the bracket install and orientation. Thanks for posting it. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

05-01-2012, 01:49 PM	#28
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	any field tests yet? __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

05-16-2012, 11:11 AM	#29
ijose 845 Drives: 07 Toyota Yaris Join Date: Feb 2012 Location: Orange County, NY Posts: 192	i just ordered mine today does it really make a difference? __________________ Angry Bird Crew #1

05-16-2012, 11:53 AM	#30
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,857	^ Yes it does! __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

05-16-2012, 12:28 PM	#31
BEEF View User's Garage Drives: 2008 yaris 3d Join Date: Apr 2011 Location: north carolina Posts: 731	I purchased the 3" extender and it shifted like a mack truck. I added the short throw shifter and it now shifts like it did at the stock height but at a much more comfortable position. I am thinking seriously about getting the in-cabin one to go along with it. it is worth the money, hands down. __________________ Be the change you wish to see in the world -Mahatma Gandhi-

04-23-2012, 06:52 PM	#21
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	the hard part depends on if you get the bracket that Micro image can supply. the horseshoe clips on the OEM bracket are kind of a pain to get out, but once you get those out it only takes some time. if it was not for those clips it would have taken me less than an hour to install include removal of some parts that will be in the way.

04-23-2012, 09:29 PM	#22
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	about an hour and a half over all, i spent 45 minutes just trying to get those clip out. they are way easier going back in. if you have a dent puller(slide or slam hammer) that works great if you can get it under the edge and pop it a few times.

04-27-2012, 10:06 PM	#24
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	now for the fun part, getting to the tranny. :D

05-01-2012, 12:12 PM	#27
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	I am so glad i put this in, I took my wife's dog to get fixed yesterday and it was nice to able to shift will the dog was laying across my arm.

05-18-2012, 05:13 PM	#32
ijose 845 Drives: 07 Toyota Yaris Join Date: Feb 2012 Location: Orange County, NY Posts: 192	just got mine in today i installed it however i coulent fit the washer on the top and the pin it is very tight in their i hope its okay and would this damage anything or is it safe? because i really like the short shifts __________________ Angry Bird Crew #1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Micro Image Short Shift Kit DIY	jpmck03	DIY / Maintenance / Service	17	02-24-2014 07:57 AM
Micro Image lowering springs 1.8" drop	markylicious	Middle East	144	10-30-2011 01:18 AM
Micro Image Short Shift Kit- prototype review	mazilla	Performance Modifications	124	09-26-2011 06:04 PM
Micro Image Short Shift Kit	cali yaris	Micro Image	15	09-07-2011 06:46 PM
Micro Image meet Jan 30, 2010	Brian	Photo-Video-Media Gallery	57	02-06-2010 10:27 PM