Yaris Sedan Deadening and Sound system upgrade - Page 40 - Toyota Yaris Forums

derickveliz2 · 10-28-2010, 11:43 AM

Quote:

Originally Posted by packetrace

How do you choose your mid speaker....by size....by Frequency Response ?

If you are going to put them in the doors just pick any 6.5" speaker of your choice.

D.

derickveliz2 · 10-28-2010, 12:22 PM

Quote:

Originally Posted by packetrace

How do you choose your mid speaker....by size....by Frequency Response ?

These Zeus Hifonics are the ones I got for the doors, soon I'll uninstall them and putting a midbass drive in kick panels. See how the OEM speaker looks so wimpy!

packetrace · 10-28-2010, 04:12 PM

So if i resume it...

Tweeter = those little black speaker with cross over

Mid = 6.5'' in the front door

Mid bass = 6x9'' ah the back

Sub = 2 x 12'' alpine type R (which i'll buy)

I amplify my mid bass , mid and my tweet...but i but a X over between the amp and the tweet and also the mid...or only xover for the tweet ?

Thank you

derickveliz2 · 10-28-2010, 04:51 PM

Quote:

Originally Posted by packetrace

I amplify my mid bass , mid and my tweet...but i but a X over between the amp and the tweet and also the mid...or only xover for the tweet ?
Thank you

I'll make a sketch for you tonight!

D.

packetrace · 10-28-2010, 04:57 PM

Oh thank you ! I really like YarisWorld everyone is helpful to everyone !! :D I'm impatient to see this :O

derickveliz2 · 10-28-2010, 08:15 PM

Quote:

Originally Posted by derickveliz2

I'll make a sketch for you tonight!

D.

I hope it helps!

D.

packetrace · 10-28-2010, 08:42 PM

NICEEE I LIKE GRAPHICS !!!!! Thanks you so much!!!!

derickveliz2 · 10-30-2010, 01:59 AM

I've been so busy, and this weekend we have BOO-BOO, and Fiambre
(Guatemala tradition of a one-of-a-kind food that we only prepare once a year) any way...

I did a little bit of sanding and located the areas on the spheres that needed some reinforment, also added some plywood inside where the a hollow male nipple will hold them in place, the wires will go through.

male nipple:

D.

packetrace · 10-30-2010, 12:48 PM

What fuse have you used for the power wire from alternator to battery ?

And if i put a 2nd battery in the trunk....i plug tthe red to alternator and the ground to body....like the one in the the hood ?

thanks
A.

sqcomp · 10-30-2010, 01:24 PM

D,

You could also look at thread-serts. They're like the ones I used in my A-pillars for the L4 baffle.

Also, take a look at what I have access to:

Something tells me you may want this reference disc? I can burn you a copy...

derickveliz2 · 10-31-2010, 02:15 AM

Quote:

Originally Posted by packetrace

What fuse have you used for the power wire from alternator to battery ?

And if i put a 2nd battery in the trunk....i plug tthe red to alternator and the ground to body....like the one in the the hood ?

thanks
A.

I'm lost here, I didn't use any fuses from the alt to the battery?

I din't put a 2nd battery, I don't really need it, my voltage with 3 amps shows an average of 13.8 volts most of the time.

derickveliz2 · 10-31-2010, 02:19 AM

Quote:

Originally Posted by sqcomp

D, take a look at what I have access to:

Something tells me you may want this reference disc? I can burn you a copy...

Yes please!

.

:thumbsup :

derickveliz2 · 10-31-2010, 02:22 AM

Quote:

Originally Posted by sqcomp

D,You could also look at thread-serts. They're like the ones I used in my A-pillars for the L4 baffle.

What are these?

I Google them but couldn't figure out how they look or how they work and where to get them.

D.

derickveliz2 · 10-31-2010, 02:24 AM

I went to Lowe's to get the "nipple(s)" but it won't work, by the time I get all the nuts and washers it gets too big, I may not be able to fit the 3" driver in the sphere.
I'm going to have to make 2 holes one for a bolt and other for the wires. Sqcomp tells me to use thread-serts so I'm digging more about it.

D.

derickveliz2 · 10-31-2010, 02:31 AM

Some thing like this is what I'm looking for...

sqcomp · 10-31-2010, 04:29 PM

Look into the holes...

It will couple like this:

You see the ones I got? The two pictures on top? Those are actually inserted with an allen wrench. That makes it SUPER simple. Look around at the harware stores locally. If you have a good one, they'll have these. As a last resort, I can get you these.

derickveliz2 · 11-02-2010, 12:36 PM

Quote:

Originally Posted by sqcomp

It will couple like this:

You see the ones I got? The two pictures on top? Those are actually inserted with an allen wrench. That makes it SUPER simple. Look around at the harware stores locally. If you have a good one, they'll have these. As a last resort, I can get you these.

Yeah! I could use something like that to hold the HL-70s in the spheres!

Thanks,

I'm still shopping around for a mechanical system to attach the spheres to the A-pillars, I have a few ideas but nothing tangible

D.

sqcomp · 11-02-2010, 02:53 PM

Let me know. Perhaps we can brainstorm something up.

10-28-2010, 04:12 PM	#705
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	So if i resume it... Tweeter = those little black speaker with cross over Mid = 6.5'' in the front door Mid bass = 6x9'' ah the back Sub = 2 x 12'' alpine type R (which i'll buy) I amplify my mid bass , mid and my tweet...but i but a X over between the amp and the tweet and also the mid...or only xover for the tweet ? Thank you __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

10-28-2010, 04:57 PM	#707
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	Oh thank you ! I really like YarisWorld everyone is helpful to everyone !! :D I'm impatient to see this :O __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

10-28-2010, 08:42 PM	#709
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	NICEEE I LIKE GRAPHICS !!!!! Thanks you so much!!!! __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

10-30-2010, 12:48 PM	#711
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	What fuse have you used for the power wire from alternator to battery ? And if i put a 2nd battery in the trunk....i plug tthe red to alternator and the ground to body....like the one in the the hood ? thanks A. __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp Last edited by packetrace; 10-30-2010 at 05:43 PM.

10-30-2010, 01:24 PM	#712
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	D, You could also look at thread-serts. They're like the ones I used in my A-pillars for the L4 baffle. Also, take a look at what I have access to: Something tells me you may want this reference disc? I can burn you a copy... __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine Last edited by sqcomp; 10-30-2010 at 05:24 PM.

10-30-2010, 01:59 AM	#710
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	I've been so busy, and this weekend we have BOO-BOO, and Fiambre (Guatemala tradition of a one-of-a-kind food that we only prepare once a year) any way... I did a little bit of sanding and located the areas on the spheres that needed some reinforment, also added some plywood inside where the a hollow male nipple will hold them in place, the wires will go through. male nipple: D.

10-31-2010, 02:24 AM	#716
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	I went to Lowe's to get the "nipple(s)" but it won't work, by the time I get all the nuts and washers it gets too big, I may not be able to fit the 3" driver in the sphere. I'm going to have to make 2 holes one for a bolt and other for the wires. Sqcomp tells me to use thread-serts so I'm digging more about it. D.

10-31-2010, 02:31 AM	#717
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	Some thing like this is what I'm looking for...

10-31-2010, 04:29 PM	#718
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	Look into the holes... It will couple like this: You see the ones I got? The two pictures on top? Those are actually inserted with an allen wrench. That makes it SUPER simple. Look around at the harware stores locally. If you have a good one, they'll have these. As a last resort, I can get you these. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

11-02-2010, 02:53 PM	#720
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	Let me know. Perhaps we can brainstorm something up. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sound deadening: sq footage amount for 3dr	goku87	In Car Entertainment + Electronics (audio / video / alarm)	29	11-14-2013 12:37 PM
2007 Yaris S Sound Deadening	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	70	12-13-2010 07:40 PM
Sound deadening	06vitzRS	General Yaris / Vitz Discussion	10	05-05-2010 01:51 PM
Sedan Door Panel Deadening	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	42	06-01-2009 02:47 PM