tooter's manifold adventure... - Page 75 - Toyota Yaris Forums

Viperoni · 07-22-2013, 07:54 AM

Looking forward to the results :)

kou · 07-22-2013, 10:17 AM

This one looks a little like your design.

tooter · 07-22-2013, 10:30 AM

Quote:

Originally Posted by kou

This one looks a little like your design.

Hey, what do you know. Someone did that design. Guess the old saying is true that there's nothing new under the sun.

What car did that come off of?

kou · 07-22-2013, 10:49 AM

That manifold is off a toyota 4e-fe engine

tooter · 07-22-2013, 10:54 AM

Makes sense that it would be Toyota as it's similar to the Corolla manifold. Even the mandrel bent tubing looks familiar.

Just did a search on WIKI. That manifold design was on the last 4E FE 1.5 engine which was discontinued in 1997. In 1998 the Corolla 1ZZ FE 1.8 engine carried over the similar design.

tooter · 07-25-2013, 07:54 PM

The tooter et just grew some new antennae...

So now it's off to the welder!

CrankyOldMan · 07-26-2013, 07:24 AM

Huzzah!

JustDidIt · 07-26-2013, 03:07 PM

Awesome! alien like...

Flipper_1938 · 07-29-2013, 10:21 AM

Is it done yet?

tooter · 07-29-2013, 04:56 PM

It's at the welder today.

When that's done
it's ready to run.

Before dropping it off, I finished porting all of the runners and bead blasted the insides as it's the last time I'll be open to do anything to it.

For comparison, this is before porting...

I should have the tooter et up and running on the car by Friday.

tooter · 07-29-2013, 08:32 PM

Came up with another idea...

TOOTER II.VII

It's for a Toyota Tacoma 2.7 4 cylinder... a 2 inch thick intake manifold spacer that makes the runners 12% longer to lower the torque curve. The prototype should be done and ready for testing in a week. I'll drive it around to let the ECU learn the new operating parameters...

...and then it's off to Harry's Dyno Shop for a few runs.

JustDidIt · 07-30-2013, 05:37 PM

Quote:

Originally Posted by tooter

Came up with another idea...

TOOTER II.VII

It's for a Toyota Tacoma 2.7 4 cylinder... a 2 inch thick intake manifold spacer that makes the runners 12% longer to lower the torque curve. The prototype should be done and ready for testing in a week. I'll drive it around to let the ECU learn the new operating parameters...

...and then it's off to Harry's Dyno Shop for a few runs.

Awesome!!

Flipper_1938 · 08-01-2013, 10:49 AM

Is it done yet?

tooter · 08-01-2013, 11:30 AM

The welder might be done with it as soon as today...

I'm not even going to clean it up, it goes right on the car to find out if it will actually work.

edit: Just called the welder and it'll be done this afternoon!

(yipee

)

Flipper_1938 · 08-01-2013, 03:16 PM

tooter · 08-01-2013, 06:01 PM

Hey Flip...

Just picked it up!

My wife is using the car today so I can't put it on yet.

But tomorrow morning it'll be on the engine and I'll be driving it.

Greg

tooter · 08-01-2013, 07:20 PM

Since I had the time, all of the welds got a quick bead blast to normalize the surface...

JustDidIt · 08-01-2013, 08:07 PM

That looks awesome!! I need to make a trip up to LA and come check the work out in person....

07-22-2013, 07:54 AM	#1333
Viperoni Drives: 2005 Toyota Echo Join Date: Aug 2010 Location: Brampton, ON Posts: 505	Looking forward to the results :) __________________ 2006 Saturn Ion Redline 2005 Toyota Echo RS 4dr hatch - Cyl #3 bad - sold 2000 Toyota Echo 2dr coupe - The track car - rusty & scrapped

08-01-2013, 11:30 AM	#1346
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	The welder might be done with it as soon as today... I'm not even going to clean it up, it goes right on the car to find out if it will actually work. edit: Just called the welder and it'll be done this afternoon! (yipee ) Last edited by tooter; 08-01-2013 at 01:16 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
homemade intake manifold	ttr125fan09	Performance Modifications	1	02-17-2012 01:09 AM
Custom Intake Manifold + Direct Port Nitrous	blacksandiegovitz	Performance Modifications	9	04-21-2010 07:05 PM
Turbo Manifold thread	Sabretooth	Forced Induction Forum	78	05-22-2009 06:52 AM
turbo manifold build...	joey1320	Forced Induction Forum	4	06-30-2007 02:26 PM

07-22-2013, 10:54 AM	#1337
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	Makes sense that it would be Toyota as it's similar to the Corolla manifold. Even the mandrel bent tubing looks familiar. Just did a search on WIKI. That manifold design was on the last 4E FE 1.5 engine which was discontinued in 1997. In 1998 the Corolla 1ZZ FE 1.8 engine carried over the similar design.

07-25-2013, 07:54 PM	#1338
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	The tooter et just grew some new antennae... So now it's off to the welder!

07-26-2013, 07:24 AM	#1339
CrankyOldMan 2ZR swap. DO IT! Ask how! View User's Garage Drives: 09 Meteoric Metallic HB Join Date: Feb 2011 Location: West Michigan Posts: 2,333	Huzzah!

07-26-2013, 03:07 PM	#1340
JustDidIt Drives: '08G2T Prius Join Date: Oct 2012 Location: United States Posts: 163	Awesome! alien like...

07-29-2013, 10:21 AM	#1341
Flipper_1938 Drives: 2010 Yaris Sedan Join Date: Oct 2010 Location: Kentucky Posts: 529	Is it done yet?

07-29-2013, 04:56 PM	#1342
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	It's at the welder today. When that's done it's ready to run. Before dropping it off, I finished porting all of the runners and bead blasted the insides as it's the last time I'll be open to do anything to it. For comparison, this is before porting... I should have the tooter et up and running on the car by Friday.

07-29-2013, 08:32 PM	#1343
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	Came up with another idea... TOOTER II.VII It's for a Toyota Tacoma 2.7 4 cylinder... a 2 inch thick intake manifold spacer that makes the runners 12% longer to lower the torque curve. The prototype should be done and ready for testing in a week. I'll drive it around to let the ECU learn the new operating parameters... ...and then it's off to Harry's Dyno Shop for a few runs.

08-01-2013, 10:49 AM	#1345
Flipper_1938 Drives: 2010 Yaris Sedan Join Date: Oct 2010 Location: Kentucky Posts: 529	Is it done yet?

08-01-2013, 03:16 PM	#1347
Flipper_1938 Drives: 2010 Yaris Sedan Join Date: Oct 2010 Location: Kentucky Posts: 529

08-01-2013, 06:01 PM	#1348
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	Hey Flip... Just picked it up! My wife is using the car today so I can't put it on yet. But tomorrow morning it'll be on the engine and I'll be driving it. Greg

08-01-2013, 07:20 PM	#1349
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	Since I had the time, all of the welds got a quick bead blast to normalize the surface...

08-01-2013, 08:07 PM	#1350
JustDidIt Drives: '08G2T Prius Join Date: Oct 2012 Location: United States Posts: 163	That looks awesome!! I need to make a trip up to LA and come check the work out in person....