 |
 |
|
|
08-18-2014, 04:02 PM
|
#73 |
 Drives: yaris/pc3 Join Date: Apr 2014
Location: cail
Posts: 29
|
This the part number i got form the part 86190-52010 will check the car after work
|
|
|
|
08-18-2014, 04:56 PM
|
#74 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,450
|
Quote:
Can you snap a pic of which head unit you have as well?
__________________
|
|
|
|
|
|
08-19-2014, 11:21 PM
|
#75 |
|
Drives: yaris/pc3 Join Date: Apr 2014
Location: cail
Posts: 29
|
ctscott
here they are |
|
|
|
|
08-19-2014, 11:25 PM
|
#76 | |
|
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,450
|
Quote:
__________________
|
|
|
|
|
|
08-20-2014, 12:12 AM
|
#77 |
|
Drives: yaris/pc3 Join Date: Apr 2014
Location: cail
Posts: 29
|
ctscott
2.666 k ohms is what i am reading off the aux port pin 4 and 3 with a mini jack plugged in with out the actual port plug in to the wiring harness |
|
|
|
|
08-20-2014, 06:42 AM
|
#78 | |
|
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,450
|
Quote:
Grab a 2.2k resistor from Radio Shack and try a quick test: With the 4 pin connector to the jack the wire order should be green, red, grey, red. Take the 2.2K resistor and stick it into the red (opposite the green) and the grey and then press the aux button on the radio and see if it goes into aux mode.
__________________
|
|
|
|
|
|
08-20-2014, 10:01 PM
|
#79 |
|
Drives: yaris/pc3 Join Date: Apr 2014
Location: cail
Posts: 29
|
Ctscott
No luck..... 2.2k in pin 4 red and 3 Greg |
|
|
|
|
08-20-2014, 10:12 PM
|
#80 | |
|
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,450
|
Quote:
The image below shows the radio connector of a Yaris, looking into the holes. ALI: Aux Left ARI: Aux Right ASGN: Ground AUXI: Switch input to enable aux mode. Make sure that the red and black (or grey) above go to AUXI for the Red and ASGN for the black or grey wire.
__________________
|
|
|
|
|
|
08-20-2014, 11:03 PM
|
#81 |
|
Drives: yaris/pc3 Join Date: Apr 2014
Location: cail
Posts: 29
|
Ctscott
Everything is correct on my end according to your schematic but no dice |
|
|
|
|
08-21-2014, 12:22 AM
|
#82 |
|
Drives: yaris/pc3 Join Date: Apr 2014
Location: cail
Posts: 29
|
Ctscott
I got it Radio 11807 Is a 8 pin set up In just added a 2.2k resistor to pin 19 and 18 But 18 pin is empty so I found random pin that fit the socket and made the connection with the radio Everything works now Thanks a bunch |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Aux Input Jack Adapter | TinyGiant | DIY / Maintenance / Service | 11 | 11-10-2012 05:33 AM |
| Viper Alarm Install | gwasabi | In Car Entertainment + Electronics (audio / video / alarm) | 28 | 08-11-2010 02:57 PM |
| Hear noise when playing music with TomTom 910 through auxiliary audio input jack | waylandchin | In Car Entertainment + Electronics (audio / video / alarm) | 11 | 04-22-2007 12:25 AM |
| High pitched whine using stock head unit / aux input? | IsLNdbOi | In Car Entertainment + Electronics (audio / video / alarm) | 8 | 02-02-2007 12:49 PM |
| aux input... | djfuji | In Car Entertainment + Electronics (audio / video / alarm) | 3 | 01-23-2007 09:25 PM |
Linear Mode
