Big BAD-ASS Brakes...Drilled - Toyota Yaris Forums

xbgod · 09-15-2010, 12:37 AM

It's been a great kit. I didn't change the M/C or proportioning valve or even need to add a residual valve.

Yes on the rear kit we drilled out the back side of the drum to keep the P/B and just added a bracket to the housing end.

The front was a complete change but still very easy to install. The calipers are 6061 billet aluminum. They are full floating like a stock caliper so you can't feel run-out like you would on a fixed drag racing caliper. Which is much better for street use anyways. The brakes are so large I doubt you would warp a rotor anyways.

Cost for front and rear: 3,000.00

XBG

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Metal scratching from brakes	alt_k1ll3r	DIY / Maintenance / Service	16	02-11-2010 12:04 AM
ADVANS and Big Brakes Package	emanansala.com	Items for Sale by private party	12	01-25-2010 05:21 AM
Bad Driving Techniques	Altitude	General Yaris / Vitz Discussion	10	02-10-2009 05:26 PM
Big Bad Oil Co.	boxerboy	Off-topic / Other Cars / Everything else Discussions	10	09-04-2006 12:46 PM

09-15-2010, 12:37 AM	#4
xbgod Banned Drives: "Burning It Down GTX2860RS XB" Join Date: Sep 2010 Location: Florida Posts: 349	It's been a great kit. I didn't change the M/C or proportioning valve or even need to add a residual valve. Yes on the rear kit we drilled out the back side of the drum to keep the P/B and just added a bracket to the housing end. The front was a complete change but still very easy to install. The calipers are 6061 billet aluminum. They are full floating like a stock caliper so you can't feel run-out like you would on a fixed drag racing caliper. Which is much better for street use anyways. The brakes are so large I doubt you would warp a rotor anyways. Cost for front and rear: 3,000.00 XBG