Quote:
Originally Posted by bteygabroat
Do you have a picture of what you are referring to? I have no idea where to put this wire. I tried the above method and just put it to a ground, but it didn't work. Thanks.
|
I bet that yours needs to see the transition from 12V to ground as opposed to floating to ground. In that case, you'd need a single pole dual throw switch to switch between +12 and ground.
As for the ebrake wire, instead of popping the center console to get at the connector, you can tap the other end of the wire at the under-dash fuse panel (behind the change cup by the driver's left knee). It's the yellow wire in pin 2 of connector 4C:
Fuse Box.jpg
07-09-2011, 10:26 PM
Similar Threads
Threaded Mode