My new exhaust - Toyota Yaris Forums

SaerinRhoe · 06-22-2009, 04:09 PM

Thanks for the replies :) I do appreciate them.

Castrex, that's the factory bend over the axle. When the car was up on the lift I pointed to where I wanted him to cut the pipe and he cut it about 3" away from the muffler (towards the front of the car). I've got the muffler at the house so I can post pictures of it tonight when I get home from work.

I'll go out to the car in a few minutes and see if I can get some better pictures with my phone from the side to show the angle and length of the pipe and the bend over the axle. If I can find a ruler or something to measure with, I'll use that in the picture as well as a reference point.

S.R.

06-22-2009, 04:09 PM	#28
SaerinRhoe '09 Yaris View User's Garage Drives: '09 Yaris Join Date: Mar 2009 Location: Dallas, Texas Posts: 346	Thanks for the replies :) I do appreciate them. Castrex, that's the factory bend over the axle. When the car was up on the lift I pointed to where I wanted him to cut the pipe and he cut it about 3" away from the muffler (towards the front of the car). I've got the muffler at the house so I can post pictures of it tonight when I get home from work. I'll go out to the car in a few minutes and see if I can get some better pictures with my phone from the side to show the angle and length of the pipe and the bend over the axle. If I can find a ruler or something to measure with, I'll use that in the picture as well as a reference point. S.R. __________________ 2009 Yaris 3-Door Liftback MT Black Sand Pearl

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Installing Greddy TI-C Exhaust System	redyaris	DIY / Maintenance / Service	13	08-01-2009 04:05 AM
FS: Megan Racing Exhaust n Header.	Sabretooth	Items for Sale by private party	6	05-17-2009 05:04 PM
does BACK-PRESSURE increase MPG vs straight thru...	marcus	Fuel Economy Forum	25	05-03-2009 09:23 PM
Fujitsubo Exhaust!!	MC-BPT	Sponsors Classifieds Area	17	11-16-2006 10:36 AM