2009 4dr. LB Speaker Wiring Question

[dccurrent]

Originally Posted by AutoXBot

I just wired my 2009 4dr LB with some new Polk audio DB651s speakers. I refered to the notes from the sticky post in this forum:


"LF Speaker +/- pink - purple +,- radio harness
RF Speaker +/- gray - blue +,- radio harness
LR Speaker +/- red - white +,- radio harness
RR Speaker +/- red - white +,- radio harness"

I used some Raptor 16 gauge speakers wires from Autozone. It had two colored wires - 1 red, 1 clear. The red had copper inside, so I'm thinking this is the positive and the clear one has aluminum wiring (for ground)?

Just want to make sure I soldered the right wires together correctly:

LF speaker: pink wire to red speaker wire, purple wire to clear wire.
RF speaker: gray wire to red speaker wire, blue wire to clear wire.
LR speaker: red wire to red speaker wire, white wire to clear wire.
RR speaker: red wire to red speaker wire, white wire to clear wire.

Thanks for the help/input guys!!!

Not sure why one wire would look aluminum and the other like copper, but besides that the connections look correct. As long as you connected them properly to the speakers' terminals they should sound fine.