Started to do my calipers

[RHDVIPbB]

Well today was a good day. Not too hot and I got an itch to work on the car. Decided to start on my calipers and get them ready for the new wheels.

I started by covering everything up and pulled the lower bolt off to raise it off the rotor.


Used my favorite tool for cleaning and polishing metal. Not too much brake dust but this did give me a clean surface for the paint.


Next I used a small piece to get into the small places the grinder missed.


Then I used a drop cloth to protect my car from any chance of overspray. I tucked it into the fender well to protect the suspension, etc.