rear beam question: one wheels sticks out more

[Flipper_1938]

Originally Posted by ilikerice

So I been reading this and thought I would go look at mine. And sure enough it is.

So I got the idea to lift the rear of the car up off the ground. Then I took a rubber mallot and hit as hard as I could the rim that poked out further. Making sure I hit the center of the rim with as much force as possible. Golf swing style. I lowered and measured it again. I hit it too hard. now the other side pokes out too far. Lifted it back up and slightly tapped it.. and it fixed it.. ;)

So the bushings are sliding in the pockets on the beam?