 |
 |
|
|
04-15-2015, 03:35 PM
|
#1 |
 Drives: 2007 Toyota Yaris Join Date: Apr 2015
Location: Minnesota
Posts: 4
|
Grinding Noise While Turning
Hello!
I am pretty stumped with what is going on with my 2007 Yaris. There is a grinding noise while turning right at full lock I took the wheel off and 7 out of the 8 lug studs on the front snapped off so those were all pounded out, removed the rust from the hub assembly and pulled the new studs into place. upon inspection I found my brake pads were pretty worn out, so I replaced them along with the rotors and both calipers. I also discovered the outboard CV boot torn so that was replaced as well. It is still grinding after replacing all of these parts and I cannot duplicate the problem running the vehicle on my hoist, it only grinds with the suspension loaded. |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Grinding noise when turning sharp right | roblobstuhh | DIY / Maintenance / Service | 14 | 07-08-2015 10:28 AM |
| grinding noise during acceleration and air condition problems | menz | DIY / Maintenance / Service | 7 | 03-29-2015 12:47 AM |
| Grinding noise in reverse | NickNickNick | DIY / Maintenance / Service | 14 | 03-15-2013 04:10 AM |
| Yaris makes a grinding noise while turning | jonathankoji | DIY / Maintenance / Service | 7 | 07-06-2011 08:01 AM |
| ABS?, Grinding Noise When Brakes Are Locked!??? | p0pNfr3sh | DIY / Maintenance / Service | 3 | 03-03-2010 06:22 AM |
Threaded Mode