Quote:
Originally Posted by myfirstyota
Please tell me I'm wrong and that the upper holes are threaded on the inboard side (like the lower holes where the axle mounts from factory). If they are... drop brackets would be very feasable. But then I think, you axe some ground clearance by lowering the whole axle...
|
You would definitely lose some clearance.
Seems, there's one trade off or another, right?
The other idea I had, adds maybe about an inch of clearance without affecting anything else.
Anyway, here's the link to using the upper bolt hole. Surely, it is threaded.
http://www.yarisworld.com/forums/sho...3&postcount=25
02-05-2019, 02:05 PM
Similar Threads
Threaded Mode