$30 Oil Catch Can, DIY - Toyota Yaris Forums

OxyG3nE · 07-10-2007, 07:09 PM

i also bought it but there were no 3/8 filter.. they dont sell it here .. so i took the 1/4 .. will it work the same or its too small? and im not sure what side to put it on.. IN in the back and OUT in the front?

Ogredude · 07-11-2007, 02:52 PM

Quote:

Originally Posted by OxyG3nE

i also bought it but there were no 3/8 filter.. they dont sell it here .. so i took the 1/4 .. will it work the same or its too small? and im not sure what side to put it on.. IN in the back and OUT in the front?

Ya sounds right, just hold your thumb over the hose when the car is running to see what side is sucking if your not sure.
this is the type of filter im talking about
http://www.homedepot.com/webapp/wcs/...ctId=100027474

The 2 female to male nipples i used were 3/8" for a snug fit with the yaris hoses, so see if they fit in that 1/4" one before you buy it

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
best synthetic oil and m/t oil??	doodoo	DIY / Maintenance / Service	122	04-03-2017 08:43 PM
Synthetic Oil	Kaotic Lazagna	DIY / Maintenance / Service	122	09-20-2007 03:40 PM
metal particles in oil	007 hatch	DIY / Maintenance / Service	9	06-22-2007 02:56 AM
DIY Oil Change	Bassmonkey	DIY / Maintenance / Service	42	02-19-2007 08:37 PM
Motor oil debate - interesting info but a long read.	mikeukrainetz	General Yaris / Vitz Discussion	6	12-10-2006 08:16 PM

07-10-2007, 07:09 PM	#1
OxyG3nE Drives: Toyota Yaris 2007 Join Date: Jul 2006 Location: Montreal , Quebec , Canada Posts: 373	i also bought it but there were no 3/8 filter.. they dont sell it here .. so i took the 1/4 .. will it work the same or its too small? and im not sure what side to put it on.. IN in the back and OUT in the front?