![]() |
|
|
|
|
|
#1 | |
![]() ![]() Drives: 09 Yaris hatch, 09 Z51 'Vette Join Date: Oct 2008
Location: RI
Posts: 100
|
Quote:
Do you understand the difference between a 6061-T6 FORGING and a sand casting (e.g. A356)? ![]() The Centerlines are FORGINGS (6061-T6). As such, they have a MUCH higher strength-to-weight ratio than cast wheels. The forging is 1.5X as strong (35,000 PSI YIELD vs. 24,000 PSI YIELD for the casting). In other words, the forged wheel could weigh roughly TWO-THIRDS that of its cast counterpart and still be just as strong. |
|
|
|
|
|
#2 | |
|
l33t3st Asshole
Drives: MY07 Yaris Liftback Join Date: Nov 2006
Location: Epcot
Posts: 588
|
Quote:
so my 9.9lb Forged wheels are going to break? any minute now? Are my wheels considered racing wheels and have an inferior build to your centerlines? |
|
|
|
|
|
#3 | |
![]() ![]() Drives: 09 Yaris hatch, 09 Z51 'Vette Join Date: Oct 2008
Location: RI
Posts: 100
|
Quote:
A 10 pound wheel - forged or not - is pushing the limits of durability on pothole filled streets - assuming the wheel isn't very narrow (e.g. 5" wide). |
|
|
|
|
|
#4 |
|
l33t3st Asshole
Drives: MY07 Yaris Liftback Join Date: Nov 2006
Location: Epcot
Posts: 588
|
|
|
|
|
|
#5 |
![]() ![]() ![]() ![]() ![]() ![]() |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Slightly damaged wheel | aucorium | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 5 | 12-06-2008 07:06 AM |
| SCION SPORT STEERING WHEEL, RED, XA AND XB, 03 TO 06 | justoneyaris | Items for Sale by private party | 3 | 12-04-2008 06:30 PM |
| Wheel Advice | caveatipse | Cosmetic Modifications (Exterior/Interior) | 8 | 09-19-2007 02:39 AM |
| forged rims Vs. alloys | red-jdm | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 14 | 07-23-2007 08:30 PM |
| Yaris wheel rate ratio (06+) ? | dsc_pat | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 11 | 07-05-2007 05:43 PM |