50 bucks cold air intake - Toyota Yaris Forums

jaserhunter · 01-20-2009, 08:42 PM

what do you think about this http://www.360tuners.com/index.asp?P...OD&ProdID=2958. its 50 bucks so it has to suck right?

1NZYaris1 · 01-20-2009, 08:47 PM

It's a long tube so you would be taking air from inside guard , $50.
is a good price for a non brand considering it's material cost is about $25.
the filter is probably a bit lite , but who knows until you buy one and try it.

thebarber · 01-20-2009, 09:35 PM

id hit it....and buy a k&n filter for it...

mikenacarato · 01-20-2009, 09:38 PM

.....crap

thebarber · 01-20-2009, 10:08 PM

Quote:

Originally Posted by mikenacarato

.....crap

explain

jaserhunter · 01-20-2009, 10:16 PM

i was just looking a weapon-r filters $52 for the filter, $130 for the dargon CAI, and $207 for the secert weapon CAI. that secert weapon is bad ass

06silveryaris · 01-20-2009, 10:47 PM

Quote:

Originally Posted by jaserhunter

what do you think about this http://www.360tuners.com/index.asp?P...OD&ProdID=2958. its 50 bucks so it has to suck right?

It will suck, air that is, just like a super expensive one will, just get a good airfilter(k&n) Its just a pipe with some bends. Go for it

btw good find

coheed · 01-20-2009, 11:56 PM

Buy it. Just make sure everythings on tight and no extra air is getting into the system. Again good find.

PetersRedYaris · 01-21-2009, 12:14 AM

Just buy an Injen/ AEM/ or Fujita intake. The only piece in these kits worth using, provided it's even built correct, is the aluminum pipe itself. The filter, mounting hardware/screws, rubber coupler, and rubber hose are all crap and will quickly fall apart. Once you buy a K&N filter ($40-$50), silicone coupler and clamps($15-$20), stainless mounting screws ($3-$4), and new hose from the valve cover to the intake ($3-$4), you may as well have bought an Injen intake off ebay for $129. You will save time, headaches, and end up with a much higher quality pipe. Trust me, I just went through this on my Xb...

ddongbap · 01-21-2009, 01:15 AM

Hit it, and quit it.

crankyelbow · 01-21-2009, 03:43 AM

Looks great to me, things these simple don't have to be so expensive... competition brings the price on down and this is a prime example. The filter is fine I'm sure, throw on an AEM dryflow and its even better.

How a metal pipe could fall apart I duno... there really aren't any complex or high precision parts worth paying a premium for... a CEL might be an issue but by now I'd bet this is just a copy of a proven design.

PHXDEMON · 01-21-2009, 07:04 AM

There's something called engineering. any monkey can fit pipe together that routes to the proper spot. The reason why you pay 200-300 dollars for a decent intake is not for the supplies but for the engineering behind it.

PHXDEMON · 01-21-2009, 07:04 AM

That being said buy an AFE intake. best bang for your buck IMHO.

ddongbap · 01-21-2009, 07:42 AM

What bang for the buck? Its nearly $200 bucks, and you'll get a few HP at best?

Quote:

Originally Posted by PHXDEMON

There's something called engineering. any monkey can fit pipe together that routes to the proper spot. The reason why you pay 200-300 dollars for a decent intake is not for the supplies but for the engineering behind it.

Well, that'll go same way for a monkey putting an intake on a well engineered car. Like the Yaris, for example.

Thej3sta2 · 01-21-2009, 10:05 AM

yeah id say you buy it and test it if you dont get any CEL then ill freaking buy one.

ChinoCharles · 01-21-2009, 11:26 AM

If you're looking to save money on an intake, buy the first used name brand intake you see on Ebay. Leave this one alone, unless you want some oxidized crap-looking pipe under your hood in 18 months.

thebarber · 01-21-2009, 12:32 PM

Quote:

Originally Posted by ChinoCharles

unless you want some oxidized crap-looking pipe under your hood in 18 months.

spray paint ftw.

Thej3sta2 · 01-21-2009, 01:12 PM

gotta love piss cans

01-20-2009, 08:42 PM	#1
jaserhunter View User's Garage Drives: 2008 yaris LB Join Date: Oct 2008 Location: NC Posts: 166	50 bucks cold air intake what do you think about this http://www.360tuners.com/index.asp?P...OD&ProdID=2958. its 50 bucks so it has to suck right?

01-20-2009, 09:35 PM	#3
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	id hit it....and buy a k&n filter for it... __________________

01-21-2009, 10:05 AM	#15
Thej3sta2 Drives: Soon to be LFA Join Date: Oct 2008 Location: Orlando, FL Posts: 523	yeah id say you buy it and test it if you dont get any CEL then ill freaking buy one. __________________

01-21-2009, 01:12 PM	#18
Thej3sta2 Drives: Soon to be LFA Join Date: Oct 2008 Location: Orlando, FL Posts: 523	gotta love piss cans __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-20-2009, 08:47 PM	#2
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	It's a long tube so you would be taking air from inside guard , $50. is a good price for a non brand considering it's material cost is about $25. the filter is probably a bit lite , but who knows until you buy one and try it.

01-20-2009, 09:38 PM	#4
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	.....crap

01-20-2009, 10:16 PM	#6
jaserhunter View User's Garage Drives: 2008 yaris LB Join Date: Oct 2008 Location: NC Posts: 166	i was just looking a weapon-r filters $52 for the filter, $130 for the dargon CAI, and $207 for the secert weapon CAI. that secert weapon is bad ass

01-20-2009, 11:56 PM	#8
coheed Drives: 08 BB LB Join Date: Dec 2008 Location: Maiden, NC Posts: 785	Buy it. Just make sure everythings on tight and no extra air is getting into the system. Again good find.

01-21-2009, 12:14 AM	#9
PetersRedYaris View User's Garage Drives: 2005 Scion xB Join Date: Nov 2006 Location: The Black Hills of South Dakota Posts: 1,059	Just buy an Injen/ AEM/ or Fujita intake. The only piece in these kits worth using, provided it's even built correct, is the aluminum pipe itself. The filter, mounting hardware/screws, rubber coupler, and rubber hose are all crap and will quickly fall apart. Once you buy a K&N filter ($40-$50), silicone coupler and clamps($15-$20), stainless mounting screws ($3-$4), and new hose from the valve cover to the intake ($3-$4), you may as well have bought an Injen intake off ebay for $129. You will save time, headaches, and end up with a much higher quality pipe. Trust me, I just went through this on my Xb...

01-21-2009, 01:15 AM	#10
ddongbap Banned Drives: yw calls me douche and racist. Join Date: Aug 2007 Location: hay Posts: 2,183	Hit it, and quit it.

01-21-2009, 03:43 AM	#11
crankyelbow Drives: speedy Join Date: Dec 2008 Location: >!>< Posts: 36	Looks great to me, things these simple don't have to be so expensive... competition brings the price on down and this is a prime example. The filter is fine I'm sure, throw on an AEM dryflow and its even better. How a metal pipe could fall apart I duno... there really aren't any complex or high precision parts worth paying a premium for... a CEL might be an issue but by now I'd bet this is just a copy of a proven design.

01-21-2009, 07:04 AM	#12
PHXDEMON View User's Garage Drives: 2007 Red Liftback Join Date: Oct 2008 Location: Phoenix, AZ Posts: 885	There's something called engineering. any monkey can fit pipe together that routes to the proper spot. The reason why you pay 200-300 dollars for a decent intake is not for the supplies but for the engineering behind it.

01-21-2009, 11:26 AM	#16
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	If you're looking to save money on an intake, buy the first used name brand intake you see on Ebay. Leave this one alone, unless you want some oxidized crap-looking pipe under your hood in 18 months.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simota Carbon Charger Cold Air Intake	lilredrocket	Performance Modifications	18	04-13-2009 04:16 AM
Intake Systems Decision Maker..	Blenjar	Performance Modifications	25	09-15-2007 11:07 PM
guess what I'm waiting for and how much I paid?	Ric n Sov's Vitz RS	General Yaris / Vitz Discussion	27	06-27-2007 08:36 PM
cold air intake	PolrWht07	Performance Modifications	8	05-28-2007 10:25 AM
Cold Air Intake vs. Short Ram Intake	nevermorez	Performance Modifications	1	01-24-2007 05:25 PM