GI: 1nz/1zz TB spacer - Toyota Yaris Forums

Nexus1155 · 04-15-2009, 03:42 PM

yeah i was about to chime in, the studs would be an issue if you go to large on the spacer. But also an adapter would be nice too for more exotic wheels if anyones into that kind of stuff..

*tk-421* · 04-15-2009, 06:22 PM

Quote:

Originally Posted by Nexus1155

yeah i was about to chime in, the studs would be an issue if you go to large on the spacer. But also an adapter would be nice too for more exotic wheels if anyones into that kind of stuff..

Well, I'd rather go for the adapter for a reasonable price. I have 15x6.5" ET +38 wheels BTW.

AlexNet0 · 04-15-2009, 06:27 PM

Quote:

Originally Posted by tk-421

Well, I'd rather go for the adapter for a reasonable price. I have 15x6.5" ET +38 wheels BTW.

So it should be fine if I modeled it on the stock wheel

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1ZZ Throttle Body Spacer	tk-421	Performance Modifications	34	07-11-2017 09:48 PM
Spacer Template for Hatchback Aftermarket Speaker Install	bigsky2	In Car Entertainment + Electronics (audio / video / alarm)	19	03-12-2014 01:53 PM
Ideal Spacer Width For the Rear?	tk-421	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	01-27-2009 05:59 PM
DIY Spacer Templates for Speakers - Hatchback	bigsky2	DIY / Maintenance / Service	9	09-22-2007 06:16 PM
Toyota Throttle Body Spacer: the Best Fuel-Saving Device	davidmills	Performance Modifications	1	07-01-2007 11:38 PM

04-15-2009, 03:42 PM	#1
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	yeah i was about to chime in, the studs would be an issue if you go to large on the spacer. But also an adapter would be nice too for more exotic wheels if anyones into that kind of stuff..