Fog light help please

[yarisugi]

Originally Posted by Liu997

Wait the kit I used didn't have no red wire, do you mean the wires I connected under the steering wheel. I still don't know much about electrics cause this is my first DIY.

Are you trying to wire the foglights so that the foglight indicator on the instrument panel lights up, too? If you are, then disregard my posts in this thread.

If you're not, then don't connect anything that's under your steering wheel. You don't even have to remove the steering column plastics.
The kit you bought has different color wires from other kits that other people bought. So, in your case there is NO red wire. It's probably a different color. You have to find out which wire on the switch is the CONSTANT POWER and which wire is the ACC/SWITCHED POWER.
The two wires in the picture are coming directly from the harness that goes to your foglight switch.

[Liu997]

Originally Posted by yarisugi

Are you trying to wire the foglights so that the foglight indicator on the instrument panel lights up, too? If you are, then disregard my posts in this thread.

If you're not, then don't connect anything that's under your steering wheel. You don't even have to remove the steering column plastics.
The kit you bought has different color wires from other kits that other people bought. So, in your case there is NO red wire. It's probably a different color. You have to find out which wire on the switch is the CONSTANT POWER and which wire is the ACC/SWITCHED POWER.
The two wires in the picture are coming directly from the harness that goes to your foglight switch.

Yea I'm wiring so the the fog indicator comes on. What would I do then. Modify the switch?

[CTScott]

Originally Posted by Liu997

Yea I'm wiring so the the fog indicator comes on. What would I do then. Modify the switch?

Take a look at the end of this thread:

http://www.yarisworld.com/forums/sho...t=15941&page=3

I have been trying to help cyberfrogg with the same issue.