 |
 |
|
|
|
|
06-29-2009, 10:46 PM
|
#1 |
|
Who said Yaris was slow?
|
Remember that is not just a matter of reducing weight... where do you reduce it is very important...
When talking about inertia and rotational mass... the weight on the outer side of the wheel is the most important. I've seen the OE flywheel of these cars and there is some material that could be remove... but really not that much and almost non near the edge... You have to be SURE the machine shop knows what they are doing... if they go crazy on the wheel it could break at high speed... not nice! (google broken flywheels) Also make sure they balance the wheel to at least the original values... Too much risk IMO If you really want this, go buy a Fidanza. |
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| flywheel question | White Yaris | DIY / Maintenance / Service | 4 | 03-16-2009 10:34 PM |
| lightweight flywheel from fidanza | dngz | Performance Modifications | 34 | 02-04-2009 12:02 AM |
| Flywheel HP to wheel HP | andries | General Yaris / Vitz Discussion | 19 | 11-26-2008 08:03 PM |
| flywheel weight | yarisdarkness | Performance Modifications | 19 | 10-31-2008 12:22 AM |
| How Heavy is the flywheel? | jouslee | DIY / Maintenance / Service | 12 | 02-22-2007 03:18 PM |
Hybrid Mode
