Free Penguin with spacer purchase !

[Penguin Garage]

Originally Posted by whooppee777

which spacer with these wheels

monarch nilo 16x8 +20 offset 215/45/16

planning ahead of time, dont have tires for them yet. already planning on pulling and rolling fenders. just curious as to whether i could get away with the 13mm spacer

well, that's a really low offset and a wide tire.

you're going to have to do some work to get that fit as is, going with our hubspacers before you do the install will allow you to do the required mods to make it fit.

a little extra pull and our camber shims will round out the car nicely.

you may want to go with the 10mm spacer although if you're looking for a much more aggressive stance the 13mm would do it.

either way spacer or no spacer you've got a lot of work to do

hopefully we'll be testing some 15x8 +20mm front and 15x8 +10mm rear wheels soon. :)

[Tamago]

Originally Posted by Penguin Garage

hopefully we'll be testing some 15x8 +20mm front and 15x8 +10mm rear wheels soon. :)

225 50 15?

[whooppee777]

Originally Posted by Penguin Garage

well, that's a really low offset and a wide tire.

you're going to have to do some work to get that fit as is, going with our hubspacers before you do the install will allow you to do the required mods to make it fit.

a little extra pull and our camber shims will round out the car nicely.

you may want to go with the 10mm spacer although if you're looking for a much more aggressive stance the 13mm would do it.

either way spacer or no spacer you've got a lot of work to do

hopefully we'll be testing some 15x8 +20mm front and 15x8 +10mm rear wheels soon. :)

not worried about the extra work. just want the most aggressive stance the yaris crowd has ever seen. those wheels+your spacers+coilovers=hella f*ckn balls to the wall awesome.

thanks for your input. i'll be placing my order within the next few weeks

[evo165]

Originally Posted by Penguin Garage

well, that's a really low offset and a wide tire.

you're going to have to do some work to get that fit as is, going with our hubspacers before you do the install will allow you to do the required mods to make it fit.

a little extra pull and our camber shims will round out the car nicely.

you may want to go with the 10mm spacer although if you're looking for a much more aggressive stance the 13mm would do it.

either way spacer or no spacer you've got a lot of work to do

hopefully we'll be testing some 15x8 +20mm front and 15x8 +10mm rear wheels soon. :)

Hi mate, do you ship internationally to Singapore? I drop u a pm as well as email but yet to hear any news from you. Thanks.