Wheel experts please have a look! - Toyota Yaris Forums

RedRide · 08-08-2009, 07:47 PM

I would also recomend that you get on solid ground when using the jack.

TheRealEnth · 08-08-2009, 08:15 PM

Quote:

Originally Posted by RedRide

I would also recomend that you get on solid ground when using the jack.

lol word that

Marthos · 08-08-2009, 08:48 PM

LOL My 15 year old floor jack just died during this test fit!

Now I can go buy a new one!!!!!

Marthos · 08-10-2009, 03:25 PM

And Installed.

supmet · 08-10-2009, 04:49 PM

Quote:

Originally Posted by RedRide

I would also recomend that you get on solid ground when using the jack.

Holy crap no kidding. Throw that scissors jack away too. I had a jetta almost fall on me, on flat concrete, using one of those pieces of shit. You're lucky you aren't digging your axle out of the lawn right now.

Rims look nice, the rear gap has got to go though.(unless that pic is before you moved it after letting it off the jack)

Marthos · 08-10-2009, 10:03 PM

Rear gap is enlarged cause we backed the car away from my junker for pics, car is leaning to the right some cause of uneven ground. But still, I am thinking about the TRD springs now, but may have gone to big for them.

You can see where the test fit was done, that is solid ground!

And like i said, my floor jack gave up the ghost, had to make sure that one wheel fit.

I dont ever get under a car without ramps, or a floor jack and stands.
Dont be afraid of the tiny jack, before the wheel came off I shook the HELL outta it, it was going nowhere!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official YARIS Wheel & Tire Guide	Black Yaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	404	06-02-2026 01:19 PM
The Yaris Steering Wheel	wornways	General Yaris / Vitz Discussion	12	10-09-2012 01:41 PM
How much would you pay for a warranty supported steering wheel extension? (3d try)	wornways	General Yaris / Vitz Discussion	36	09-16-2009 10:16 AM
Steering Wheel Issue.	Twistoffate0817	General Yaris / Vitz Discussion	8	01-31-2009 07:38 PM
forged rims Vs. alloys	red-jdm	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	14	07-23-2007 08:30 PM

08-08-2009, 07:47 PM	#1
RedRide Drives: '09 Yaris carmine red 2d HB Join Date: Jun 2009 Location: Middletown, NY Posts: 1,502	I would also recomend that you get on solid ground when using the jack.

08-08-2009, 08:48 PM	#3
Marthos View User's Garage Drives: 07 3Dr LB Join Date: Jul 2009 Location: NEPA Posts: 58	LOL My 15 year old floor jack just died during this test fit! Now I can go buy a new one!!!!!

08-10-2009, 03:25 PM	#4
Marthos View User's Garage Drives: 07 3Dr LB Join Date: Jul 2009 Location: NEPA Posts: 58	And Installed.

08-10-2009, 10:03 PM	#6
Marthos View User's Garage Drives: 07 3Dr LB Join Date: Jul 2009 Location: NEPA Posts: 58	Rear gap is enlarged cause we backed the car away from my junker for pics, car is leaning to the right some cause of uneven ground. But still, I am thinking about the TRD springs now, but may have gone to big for them. You can see where the test fit was done, that is solid ground! And like i said, my floor jack gave up the ghost, had to make sure that one wheel fit. I dont ever get under a car without ramps, or a floor jack and stands. Dont be afraid of the tiny jack, before the wheel came off I shook the HELL outta it, it was going nowhere!