Need fog light switch and relay

[Treyz]

Originally Posted by Altitude

I used the relay that came with my kit and just wired the contacts to the factory relay plug and I get the dash indicator. You don't *need* to have the factory relay to plug in to get the dash light to work.

You can, but it requires more work and about the same in $ if you have to go and buy the wire and the crimp blades (assuming thats what you did).

Pic of your work? Curious to see exactly how you did the wiring.

[Altitude]

Originally Posted by Treyz

You can, but it requires more work and about the same in $ if you have to go and buy the wire and the crimp blades (assuming thats what you did).

Pic of your work? Curious to see exactly how you did the wiring.

I didn't want to wait to have to mail order the actual relay and I had all the parts on hand to do it this way.

Anyhow, here's a pic of the wires going to the relay plug. Not a lot of help, but you get the idea... these wires are connected to the contact pins of the relay included with my fog light kit.