Help with Fog Lights!! (I HATE WIRES!)

[Lafiro]

I have the same problem. Remove the yellow wire and let it hang not touching anything.

Now turn on your fog lights, and they should work! Also make sure the ground is connected in the engine bay for the fog lights as well, don't forget that.

I also have Garms kit, it also came completely different then what the diagram asked for, with extra parts and cables. But at the end I got it working.

I am only stuck now wondering why it is that if I connect the yellow wire to the harness behind the light dimmer, that is doesnt allow anything to work.

Let me know what happens when you un-splice that wire to test what I said.

[kuyachris84]

did u connect the red wires coming from the fog light... using both? or just one red wire?

just curious....

I'll try what u said.

[kuyachris84]

Originally Posted by Lafiro

I have the same problem. Remove the yellow wire and let it hang not touching anything.

Now turn on your fog lights, and they should work! Also make sure the ground is connected in the engine bay for the fog lights as well, don't forget that.

I also have Garms kit, it also came completely different then what the diagram asked for, with extra parts and cables. But at the end I got it working.

I am only stuck now wondering why it is that if I connect the yellow wire to the harness behind the light dimmer, that is doesnt allow anything to work.

Let me know what happens when you un-splice that wire to test what I said.

I unspliced the yellow and it still won't turn on.

Can you take pictures of your install? How does mine compare to yours?

I wanna see how you setup he wires in the engine bay. I reconnected the ground in the engine to the negative battery. Did you end up using the white and black wire? Should i splice the black wire into the other ground wire?

[kuyachris84]

I wanna know what you did here... i have the black and white wires (which came off the removed relay)... taped off and the two red wires connected to the two wires that go into pin1 and pin2.

Am I suppose to ground that second black wire?

I already have that other black wire connected to ground via battery.

Did you use only one red wire?