installing tweeters

[sqcomp]

wait one...

Before we go ahead and start talking about crossover points let's realize what we are saying first.

You can have a high crossover point. It depends on your mid, the location of the mid and tweeter, and the placement of the tweeter.

One has to be wary of crossing low simply because like it or not, you're playing down into the midrange around 2kHz. With tweeters playing to 2kHz, you will now split the imaging cues between four drivers…about ¾ of the tones will emanate from the midrange down in the door, and ¼ from the tweeter up high. In this instance, there will be no defined center image in the vehicle.

...But if you want to use a midbass that cannot play to 4kHz, then the tweeter *must* be mounted right next to the midbass.

The key is your mid...not the tweeter. If the mid's range is capable of playing to 4kHz and up, you are golden to separate the tweeter and the mid.

Thoughts?