Yaris Sedan Deadening and Sound system upgrade

[sqcomp]

you have the L6's in? If so, take the crossover point down to 45 hz at 36 dB and the L6's to 45 at 24 dB. The TA on the sub (if it's in the rear) should be about 60-ish inches.

Imagine that little CRX (which weighs 1700-ish lbs curb weight) stripped down with a racing suspension on it...add 500 N/A horsepower at 10K RPM WITH a sequential...you get a little car that has more power to weight than a Saleen S7 Twin Turbo. I'll betcha I can get that car down to mid 1400 lbs. That would put the HP to weight of the car (if set up correctly) greater than a Pagani Zonda...

[derickveliz2]

Originally Posted by sqcomp

you have the L6's in? If so, take the crossover point down to 45 hz at 36 dB and the L6's to 45 at 24 dB. The TA on the sub (if it's in the rear) should be about 60-ish inches.

No I don't have the L6's in, I'm sure that is why the software is going that high!

But I'm saving this info once the time comes by! even though the way it sounds (Mid/bass) now was amazing for the DIYMeet members at the Massachusetts meet and had a chance to hear my set up, one of them had L6's and he was very much impressed,...

so... I guess it just gets better and better!

D.