DIY Cruise Control on 07-08 Yaris (step by step)

[rob1005]

Just finished installing and works perfectly. Wish the 07s had a cruise light on the dash though. Oh well, thanks for the good DIY Scott.

I was wondering how you managed to feed the clutch switch wires through the firewall. I gave up because of limited space and just fed the wires back through the passenger side grommet.

[CTScott]

Originally Posted by rob1005

Just finished installing and works perfectly. Wish the 07s had a cruise light on the dash though. Oh well, thanks for the good DIY Scott.

I was wondering how you managed to feed the clutch switch wires through the firewall. I gave up because of limited space and just fed the wires back through the passenger side grommet.

With the giant grommet on the driver's side, where the main cable harness goes through, there are two small nipples that you can poke through. You have to first go through with something sharp, and then the wire will feed through.

[Ratz]

For DIY cruise control

When drilling 1-1/8” opening in the steering wheel trim/cover, I used small square of black winds surfing jacket neoprene (just to cover up guts of the switch) and then used sliced windshield washer hose to finish the edge. What can I say , my wife’s attention to details is admirable.