Garage Door Bottom Seal "Front Spoiler"

[derickveliz2]

Originally Posted by 3cyltrbo

can you give some info on spacing between screws ? / washer size / washers on front and back of screws etc......

Cheers

Will

Well, spacing was about 3 inches + 3M Scotch 5lb Exterior Heavy-Duty Mounting Tape.




The Rubber:




And the Mechanical power:






D.

[jpmck03]

Originally Posted by derickveliz2

...3M Scotch 5lb Exterior Heavy-Duty Mounting Tape...

Thanks for listing the brand and type of mounting tape!

I've read through a number of these Home Depot lip threads and everyone seems to just give a vague "I used mounting tape" to describe what they used!

If I ever get around to doing this, at least I'll know what to look for!

[derickveliz2]

Originally Posted by jpmck03

Thanks for listing the brand and type of mounting tape!

I've read through a number of these Home Depot lip threads and everyone seems to just give a vague "I used mounting tape" to describe what they used!

If I ever get around to doing this, at least I'll know what to look for!

You are welcome, actually I did use 2 kinds but I bet they where the same stuff, I was lazy to pick up from the trash can and take a picture of the second kind of tape, this one I got at Home Depot... and it does say 3M at the bottom.





D.