tooter's manifold adventure... - Toyota Yaris Forums

CrankyOldMan · 06-12-2012, 06:30 AM

Doh, I should have been more specific, eh? The bolt pattern for the head-side of the intake. I made some educated guesses on my CAD model, but haven't actually measured them.

tooter · 06-12-2012, 11:15 AM

Quote:

Originally Posted by CrankyOldMan

Doh, I should have been more specific, eh? The bolt pattern for the head-side of the intake. I made some educated guesses on my CAD model, but haven't actually measured them.

You got it.

When I get home from work this evening, I'll lay straight edges across the two rows of bolt holes and will be able to give you some x and y measurements.

tooter · 06-13-2012, 12:37 AM

Hey Cranky,

Here's some of the measurements. They're not perfect but accurate to a millimeter because I just used a ruler.

Bolt holes on intake manifold to engine head connection
looking at the flange from the position of the bolt holes making a W.

The y distance between the two rows of bolt holes (not including the one hole that's offset) is 24mm.

The x distance between the two holes on either side of the center hole is 166mm.

The x distance from the center hole to the end hole which is in line with it is 163mm.

The y distance beween the one offset hole and the closest hole to it is 33mm.

The x distance between the center hole and the offset hole is 163mm.

Hope this helps. Let me know if you need any clarification.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
homemade intake manifold	ttr125fan09	Performance Modifications	1	02-17-2012 01:09 AM
Custom Intake Manifold + Direct Port Nitrous	blacksandiegovitz	Performance Modifications	9	04-21-2010 07:05 PM
Turbo Manifold thread	Sabretooth	Forced Induction Forum	78	05-22-2009 06:52 AM
turbo manifold build...	joey1320	Forced Induction Forum	4	06-30-2007 02:26 PM

06-12-2012, 06:30 AM	#1
CrankyOldMan 2ZR swap. DO IT! Ask how! View User's Garage Drives: 09 Meteoric Metallic HB Join Date: Feb 2011 Location: West Michigan Posts: 2,333	Doh, I should have been more specific, eh? The bolt pattern for the head-side of the intake. I made some educated guesses on my CAD model, but haven't actually measured them.

06-13-2012, 12:37 AM	#3
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	Hey Cranky, Here's some of the measurements. They're not perfect but accurate to a millimeter because I just used a ruler. Bolt holes on intake manifold to engine head connection looking at the flange from the position of the bolt holes making a W. The y distance between the two rows of bolt holes (not including the one hole that's offset) is 24mm. The x distance between the two holes on either side of the center hole is 166mm. The x distance from the center hole to the end hole which is in line with it is 163mm. The y distance beween the one offset hole and the closest hole to it is 33mm. The x distance between the center hole and the offset hole is 163mm. Hope this helps. Let me know if you need any clarification.