TAIL,REAR,LICENCE LIGHTS NOT WORKING

[bouYaris]

Done the check wonder if done correctly

with Multimeter on 20V diret current
first check done with headlight connector (Disconnected from switch )
where the wire enters the back of the connector
Pin13 = 12.37
Pin 10 = 0
see picture
https://drive.google.com/file/d/0B-A...ew?usp=sharing
https://drive.google.com/file/d/0B-A...ew?usp=sharing

I put the connector back
with swith ON
pin13 = 12.28
pin10 = 12.28

with swtich OFF
pin13 = 12.36
pin10 = 0

[CTScott]

Originally Posted by bouYaris

Done the check wonder if done correctly

with Multimeter on 20V diret current
first check done with headlight connector (Disconnected from switch )
where the wire enters the back of the connector
Pin13 = 12.37
Pin 10 = 0
see picture
https://drive.google.com/file/d/0B-A...ew?usp=sharing
https://drive.google.com/file/d/0B-A...ew?usp=sharing

I put the connector back
with swith ON
pin13 = 12.28
pin10 = 12.28

with swtich OFF
pin13 = 12.36
pin10 = 0

Perfect! OK - So, the power feed (fuse) is good. The switch is also good.

Now, let's jump to the back of the car and see what we see at the tail light connector.

With the headlight switch on, on the tail light connector measure the voltage between the green wire (red lead) and the white wire with a black stripe (black lead).