All New Yaris Latino America Cruise Control

[Javier_vios]

I know for fact that is not just de cruise control switch because I try the just switch and didn`t work. I did not check the spiral wiring to the DL3 conector and didn`t check the wiring from the DL3 conector to the ECU (pin 40).

If were a programing problem... Is there any solution? Or I need to go with an aftermarket cruise control ??

Best Regards
Javier

[CTScott]

Originally Posted by Javier_vios

I know for fact that is not just de cruise control switch because I try the just switch and didn`t work. I did not check the spiral wiring to the DL3 conector and didn`t check the wiring from the DL3 conector to the ECU (pin 40).

If were a programing problem... Is there any solution? Or I need to go with an aftermarket cruise control ??

Best Regards
Javier

I don't have the wiring diagrams for the Vios, so I can't tell for sure. Does the ECM look like the 06-11 ones (which have the connector with the pin 40 shown in the DIY) or does the ECM look different than that?

[Javier_vios]

I just have the model, later I´m gonna try to remove the "bag" to see the ecu.
I still can`t figure out how to remove it