RS Intake Manifold,airbox mod and 1zzfe throttle body/injectors

[Neinris]

Originally Posted by mitch9521

No. Stock injectors and TB, the throttle response doesn't bother me after I swapped in the Lexus IS250 pedal that gets rid of the dead spot and makes the pedal heavier feeling.

I've thought of doing the pedal swap in the future. Would you share how you mounted the pedal? Did you make an adaptor plate?

[mitch9521]

Originally Posted by Neinris

I've thought of doing the pedal swap in the future. Would you share how you mounted the pedal? Did you make an adaptor plate?

The gen 3 Vitz RS has its own OEM pedal bracket so I just ordered one from RHDJapan. I don't know if it will work in a 2nd gen though.

Part number is 78114-52020.

[Neinris]

Originally Posted by mitch9521

The gen 3 Vitz RS has its own OEM pedal bracket so I just ordered one from RHDJapan. I don't know if it will work in a 2nd gen though.

Part number is 78114-52020.

Thanks! Does it look like something like this? If so, did it feel weird that the pedal moved forward? The second and third gen's throttle pedals are the same btw.

[mitch9521]

Originally Posted by Neinris

Thanks! Does it look like something like this? If so, did it feel weird that the pedal moved forward? The second and third gen's throttle pedals are the same btw.

Sort of, its metal though and raises the pedal up about an inch which makes it almost level with the brake and clutch, makes heel-toe a breeze. The Lexus pedal I pulled out of the junkyard had that spacer, I didn't end up using it though and threw it out.

[Neinris]

Originally Posted by mitch9521

Sort of, its metal though and raises the pedal up about an inch which makes it almost level with the brake and clutch, makes heel-toe a breeze. The Lexus pedal I pulled out of the junkyard had that spacer, I didn't end up using it though and threw it out.

Thanks! I can probably make such an adapter plate. It won't be pretty, but I won't see it so it'll be ok.

[mitch9521]

Originally Posted by Neinris

Thanks! I can probably make such an adapter plate. It won't be pretty, but I won't see it so it'll be ok.

If I remember right, the bracket was only ~$12 CAD on RHDJapan's OEM store lol

[Neinris]

Originally Posted by mitch9521

If I remember right, the bracket was only ~$12 CAD on RHDJapan's OEM store lol

I'm not sure if you've looked recently, I punched in that PN 78114-52020, but it's no longer available.