The custom/aftermarket exhaust thread! [Pics + Videos] - Page 12 - Toyota Yaris Forums

JessMess · 11-25-2016, 03:41 PM

Made my own muffler delete.. I wanted to keep as much stock material as possible. This is what i came up with..

JessMess · 11-25-2016, 03:42 PM

Here it is with exhaust tip

paulelhardcore · 01-16-2017, 07:40 PM

Hi everyone, I am looking to get midpipe for my yaris sedan 2010. On the forum I only see about nitto midpipe or custom. But no clue where I can get nitto midpipe. If I need to go the route custom. Which catalytic hi flow and resonator hi flow should get. So far I got on the car dc sport header, catback dc sport and intake injen.

thebarber · 02-09-2017, 10:19 AM

Quote:

Originally Posted by paulelhardcore

Hi everyone, I am looking to get midpipe for my yaris sedan 2010. On the forum I only see about nitto midpipe or custom. But no clue where I can get nitto midpipe. If I need to go the route custom. Which catalytic hi flow and resonator hi flow should get. So far I got on the car dc sport header, catback dc sport and intake injen.

cat and resonator are 2" thru. just have someone fabricate your exhuast at 2" mandrel or 2.25" crush bent from the back end of the resonator to the back of the car.

thats what i did way back when (2.25" crush bent res-axle section with megan axleback muffler) and it was great. really picked up the middle and top end power

jackkb1998 · 02-08-2017, 07:54 PM

Hi,

I have just done a muffler delete and don't plan on keeping it like this. Are there any pieces I can buy that will be a nice fit or is this something I have to build myself? I can weld pieces from the old muffler to a new exhaust, but am unsure if anyone has had any experience with this.

ern-diz · 06-23-2017, 10:17 AM

Looks really good, but isn't the muffler there too? Looks like more than just the tip.

*kimona* · 06-23-2017, 10:56 AM

Quote:

Originally Posted by ern-diz

Looks really good, but isn't the muffler there too? Looks like more than just the tip.

Yup, looks like the complete super shiny muffler installed there... and the GReddy licence plate frame, too!

06YarisRS · 11-21-2018, 06:27 AM

Here is my Megan axleback installed. The car has to go to an exhaust shop to get everything lined up - muffler needs to be rolled a few degrees clockwise . I also ordered 4 new Walker 35286 insulators/hangers as my old ones were pretty soft and stretched. The axleback is attached to an aftermarket Scion xD midpipe. Considering having the shop run 2.25" pipe from the resonator to the axleback.

Here is a video. Skip to 0:56 if you just want to hear the exhaust.

https://www.youtube.com/watch?v=5Edvs_TSGkY

Pic:

Compeer · 11-24-2022, 04:36 AM

Here my Tanabe medallion g fordan Axle back vid I made right after the install
https://drive.google.com/file/d/1TAt...usp=share_link

Compeer · 12-29-2023, 09:55 AM

I made my own headers over the last few weeks. Out side is ugly but the inside I have dremmeled and sanded the crap out of of and she sounds pretty good now.

https://drive.google.com/file/d/1ePY...ew?usp=sharing

I also found a very unique modellisto rear axle back mid mount exhaust, has twin middle exhuast stainless exhaust and lip for it, will probably sell it tho I love my tannabe one. Will take some pics of the modelissto one for you all later.

mitch9521 · 12-29-2023, 11:34 PM

Quote:

Originally Posted by Compeer

I made my own headers over the last few weeks. Out side is ugly but the inside I have dremmeled and sanded the crap out of of and she sounds pretty good now.

https://drive.google.com/file/d/1ePY...ew?usp=sharing

I also found a very unique modellisto rear axle back mid mount exhaust, has twin middle exhuast stainless exhaust and lip for it, will probably sell it tho I love my tannabe one. Will take some pics of the modelissto one for you all later.

Modellista Sold a center exhaust and rear bumper lip for the 3rd gen Vitz RS, fairly easy to find.

Split · 11-19-2008, 11:15 AM

in car exhaust clip: http://www.youtube.com/watch?v=AXAyTLtkHOs
unfortunately you can mostly only hear the intake. when its warmer out i'll try doing one with the winters down.

intake: Simota CAI converted to SRI with Bomz (Apex-i Style) Cone Air Filter
axle back: Nitto
mid pipe: stock mid-pipe with resonator and second cat replace with a cherry bomb glass-pack

I used to have the nitto mid-pipe in which sounded a tiny bit deeper (maybe 1dB less loud too), and maybe made like 1hp more.. but I didn't want to run cat-less so this way at least I have one cat.

Gideon · 12-10-2008, 09:14 PM

Dunno why I didn't add this one too when I made the thread, but one of my exhaust inside the car.

N3misiS · 12-17-2008, 01:58 PM

Yo Guys,

I have the Dyno tests, I need to scan them and post them,
any way here are more foto's, I wish my camera was working!!!

But I took a few more pix with my phone...

Oh and remember, I am in SOuth africa, we do not really care about the enviromental stuff, we do not have even close he trafic amount you gius do, although it can get busy, I mean where doesnt it.

TOUGEghost · 01-06-2009, 08:06 AM

Stock vs DC Sports header:

Installed:

Greddy Ti-C:

zer0sk8ordie · 09-20-2009, 05:05 PM

Quote:

Originally Posted by TOUGEghost

Greddy Ti-C:

is this the 09 S? the exhaust clears the lip ok?

kid chino · 10-01-2009, 08:38 AM

Quote:

Originally Posted by zer0sk8ordie

is this the 09 S? the exhaust clears the lip ok?

I have an 09 rs same as the us spec s with a greddy ti-c fitment is perfect the tip sits a bit underneath the rear lip but looks and sounds great

1NZYaris1 · 01-09-2009, 04:32 PM

Did this a couple of months ago

11-25-2016, 03:41 PM	#1
JessMess Drives: 08 Yaris hatch back Join Date: Nov 2016 Location: Waldorf Maryland Posts: 12	Made my own muffler delete.. I wanted to keep as much stock material as possible. This is what i came up with.. Last edited by JessMess; 02-04-2017 at 02:17 PM.

02-08-2017, 07:54 PM	#5
jackkb1998 I've made a post! Drives: 2015 Toyota Yaris 5 Speed 1.5L Join Date: Feb 2017 Location: Ohio Posts: 1	Help with exhaust on a 2015 Toyota Yaris Hatchback Hi, I have just done a muffler delete and don't plan on keeping it like this. Are there any pieces I can buy that will be a nice fit or is this something I have to build myself? I can weld pieces from the old muffler to a new exhaust, but am unsure if anyone has had any experience with this.

06-23-2017, 10:17 AM	#6
ern-diz View User's Garage Drives: 2007 Liftback Join Date: Sep 2007 Location: CA all day Posts: 3,794	Looks really good, but isn't the muffler there too? Looks like more than just the tip. __________________ On Instagram On Wheelwell

11-21-2018, 06:27 AM	#8
06YarisRS View User's Garage Drives: 06 2ZR Turbo Yaris RS Join Date: Aug 2017 Location: Fredericton, New Brunswick, Canada Posts: 2,384	Here is my Megan axleback installed. The car has to go to an exhaust shop to get everything lined up - muffler needs to be rolled a few degrees clockwise . I also ordered 4 new Walker 35286 insulators/hangers as my old ones were pretty soft and stretched. The axleback is attached to an aftermarket Scion xD midpipe. Considering having the shop run 2.25" pipe from the resonator to the axleback. Here is a video. Skip to 0:56 if you just want to hear the exhaust. https://www.youtube.com/watch?v=5Edvs_TSGkY Pic: __________________ 2006 Yaris 5 Door RS 2ZR-FE (2011 Corolla 1.8L) Swapped, Automatic, T-28 Turbocharged (8 psi), HSD MonoPro Coilovers, DIY W/M Injection, custom 3" cold air intake, custom 2.5" exhaust, TRD rear sway bar, Penguin Garage 13mm spacers (rear), custom Civic front lip, full repaint, Android 6.0 7" touchscreen, Rockford Fosgate speakers, tweeters, NVX underseat subwoofer https://www.instagram.com/2zr_turbo_yarisrs/

12-29-2023, 09:55 AM	#10
Compeer Drives: NCP90 TRD Yaris Manual Join Date: Oct 2022 Location: Auckland, NZ Posts: 272	I made my own headers over the last few weeks. Out side is ugly but the inside I have dremmeled and sanded the crap out of of and she sounds pretty good now. https://drive.google.com/file/d/1ePY...ew?usp=sharing I also found a very unique modellisto rear axle back mid mount exhaust, has twin middle exhuast stainless exhaust and lip for it, will probably sell it tho I love my tannabe one. Will take some pics of the modelissto one for you all later. Last edited by Compeer; 12-29-2023 at 10:06 AM.

11-25-2016, 03:42 PM	#2
JessMess Drives: 08 Yaris hatch back Join Date: Nov 2016 Location: Waldorf Maryland Posts: 12	Here it is with exhaust tip

01-16-2017, 07:40 PM	#3
paulelhardcore Drives: yaris sedan Join Date: Feb 2010 Location: knoxville Posts: 26	Hi everyone, I am looking to get midpipe for my yaris sedan 2010. On the forum I only see about nitto midpipe or custom. But no clue where I can get nitto midpipe. If I need to go the route custom. Which catalytic hi flow and resonator hi flow should get. So far I got on the car dc sport header, catback dc sport and intake injen.

11-24-2022, 04:36 AM	#9
Compeer Drives: NCP90 TRD Yaris Manual Join Date: Oct 2022 Location: Auckland, NZ Posts: 272	Here my Tanabe medallion g fordan Axle back vid I made right after the install https://drive.google.com/file/d/1TAt...usp=share_link

11-19-2008, 11:15 AM	#12
Split Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Edmonton Posts: 393	in car exhaust clip: http://www.youtube.com/watch?v=AXAyTLtkHOs unfortunately you can mostly only hear the intake. when its warmer out i'll try doing one with the winters down. intake: Simota CAI converted to SRI with Bomz (Apex-i Style) Cone Air Filter axle back: Nitto mid pipe: stock mid-pipe with resonator and second cat replace with a cherry bomb glass-pack I used to have the nitto mid-pipe in which sounded a tiny bit deeper (maybe 1dB less loud too), and maybe made like 1hp more.. but I didn't want to run cat-less so this way at least I have one cat. Last edited by Split; 11-24-2008 at 02:05 AM.

12-10-2008, 09:14 PM	#13
Gideon ★weeaboo★ View User's Garage Drives: 2008 Bayou LB Join Date: Oct 2008 Location: Sunnyvale, CA Posts: 661	Dunno why I didn't add this one too when I made the thread, but one of my exhaust inside the car.

01-06-2009, 08:06 AM	#15
TOUGEghost Mr. Clean View User's Garage Drives: 2009 Yaris S 3-Door Join Date: Nov 2008 Location: Kauai Posts: 268	Stock vs DC Sports header: Installed: Greddy Ti-C: Last edited by TOUGEghost; 01-06-2009 at 05:40 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Installing Greddy TI-C Exhaust System	redyaris	DIY / Maintenance / Service	13	08-01-2009 04:05 AM
Why is DTM exhaust thread closed?	gr8yaris	Performance Modifications	4	01-13-2007 11:01 AM
Fujitsubo Exhaust!!	MC-BPT	Sponsors Classifieds Area	17	11-16-2006 10:36 AM