DIY Cruise Control on 07-08 Yaris (step by step)

[drunix]

I just finished a 1000 mile trip with the 2 button cruise control and I liked it so much that I upgraded to a variation on the 4 button version. While on the road I picked up a MOMENTARY-OFF-MOMENTARY toggle switch (at HSC Electronics in California, $1.49). I now have Up=RES/+ and Down=SET/- on the switch, a low profile Microswitch push button for On/Off and a C&K white pushbutton for Cancel.
By using 3 differently shaped controls, I can feel the difference, so I don't need to be able to see them. I had the push buttons in my stash.

The toggle switch is similar to this: http://search.digikey.com/scripts/Dk...name=EG2388-ND

Note also this is a 2010 Yaris automatic, stripped down (no power package), and it had the cruise control wiring in place.

[sheraz2000]

i have one question here.

My yaris D3 connector has one cable (black). When i remove this connector, the horn stops working. is it the horn connector ? what kind of power does this cable provide. Negative or positive ? also the pin 40 on the ECM doesnt contain any sort of power when i check it with a power meter. Is it supposed to have any pulse or something? i am just a little worried to not damage the ECM by doing this sort of a setup. Is it safe ?? 100% ?? :p

[CB900F2]

Scott... It appears for my 08 CND Sedan, the wire run from the ECU to AD4 is there, and what is missing is the wire run from AD4 to D3..

Since AD4 is tucked way in the top left side of the inner dash, not sure if you have ever taken apart your Yaris's top dash, and if you have noticed if both ends of AD4 have the light blue wire.. I am really hoping Toyota has the wire run from AD4 to D3, but only decided to tuck away the run from AD4 to D3 some where.

I would find it odd that all of the other wiring is there as even the clutch switch is there, but they manufactured the wire harness with only missing the run from AD4 to D3

What do you think?

[CTScott]

Originally Posted by CB900F2

Scott... It appears for my 08 CND Sedan, the wire run from the ECU to AD4 is there, and what is missing is the wire run from AD4 to D3..

Since AD4 is tucked way in the top left side of the inner dash, not sure if you have ever taken apart your Yaris's top dash, and if you have noticed if both ends of AD4 have the light blue wire.. I am really hoping Toyota has the wire run from AD4 to D3, but only decided to tuck away the run from AD4 to D3 some where.

I would find it odd that all of the other wiring is there as even the clutch switch is there, but they manufactured the wire harness with only missing the run from AD4 to D3

What do you think?

Getting to AD4 requires removing the top of the dash. The wire from AD4 to D3 is definitely not tucked, as it would be part of the harness that also contains the horn wire.

[CTScott]

Originally Posted by sheraz2000

i have one question here.

My yaris D3 connector has one cable (black). When i remove this connector, the horn stops working. is it the horn connector ? what kind of power does this cable provide. Negative or positive ? also the pin 40 on the ECM doesnt contain any sort of power when i check it with a power meter. Is it supposed to have any pulse or something? i am just a little worried to not damage the ECM by doing this sort of a setup. Is it safe ?? 100% ?? :p

I don't believe that Yaris for your area have the cruise functionality. Besides that, the black wire is the horn. There are two additional wires that get added to D3 for cruise control.

Check out this thread for more info:

http://www.yarisworld.com/forums/sho...ght=faq+cruise

[sheraz2000]

Originally Posted by CTScott

I don't believe that Yaris for your area have the cruise functionality. Besides that, the black wire is the horn. There are two additional wires that get added to D3 for cruise control.

Check out this thread for more info:

http://www.yarisworld.com/forums/sho...ght=faq+cruise

In my area YARIS is not available, so i had to buy it from JAPAN. Does it work with JAPANESE models ??

[sheraz2000]

also i have got a Yaris sedan (BELTA in japan) . got 3 wires in D3 connector. Got it also from JAPAN. can i do the CC with both these cars ??

[CTScott]

Originally Posted by sheraz2000

also i have got a Yaris sedan (BELTA in japan) . got 3 wires in D3 connector. Got it also from JAPAN. can i do the CC with both these cars ??

If the Belta has blue and brown as the other two wires in D3, then it should work. If it has the cruise control indicator in the cluster, then to test it just jump the blue to the brown with the ignition on and the CC indicator should light.


For the other, which just has the black wire, the best quick test is to measure the voltage on the ECM pin (A21-Pin 40) with the ignition on. If CC is active on the ECM, then that pin will have 12V on it.

[sheraz2000]

Originally Posted by CTScott

If the Belta has blue and brown as the other two wires in D3, then it should work. If it has the cruise control indicator in the cluster, then to test it just jump the blue to the brown with the ignition on and the CC indicator should light.


For the other, which just has the black wire, the best quick test is to measure the voltage on the ECM pin (A21-Pin 40) with the ignition on. If CC is active on the ECM, then that pin will have 12V on it.

well, when i opened up the D3 connector on my belta, i got these wires. Tell me what to do from here forward. SORRY about the blurry pic, was taken from my mobile cam. But the wire colors r pink, orange, grey and black. there is no blue and brown cable. How to check if my car has CC in ECM.

[CTScott]

Originally Posted by sheraz2000

well, when i opened up the D3 connector on my belta, i got these wires. Tell me what to do from here forward. SORRY about the blurry pic, was taken from my mobile cam. But the wire colors r pink, orange, grey and black. there is no blue and brown cable. How to check if my car has CC in ECM.

Those three wires are for the steering wheel audio controls. If a Yaris is wired for them, then it definitely does not have Cruise Control. Based on the wiring diagrams, areas that have steering wheel radio controls do not have cruise control and areas that have cruise control do not have steering wheel radio controls.

[sheraz2000]

Originally Posted by CTScott

Those three wires are for the steering wheel audio controls. If a Yaris is wired for them, then it definitely does not have Cruise Control. Based on the wiring diagrams, areas that have steering wheel radio controls do not have cruise control and areas that have cruise control do not have steering wheel radio controls.

but, my steering wheel doesnt have any radio controls. can i do the CC still, using the pin 40 method and using the black wire ?? (while ignoring the rest of the cables) ???

[Daren]

Hello!
I have a question, I hope you all don't mind....
I have an 08 liftback, MT, without wiring. I've installed the buttons and the wiring to ground and ECM. I don't have a harness for the clutch switch, so I need to rig the switch to go into the fuse box in the engine bay. (If this is wrong please correct me)

The clutch switch has two contacts, so I assume I run two wires off of those contacts into the fuse box. My question is which wire goes where? Looking at the picture on the top of the 4th page of the pdf, I'm not entirely sure.

[CTScott]

Originally Posted by Daren

Hello!
I have a question, I hope you all don't mind....
I have an 08 liftback, MT, without wiring. I've installed the buttons and the wiring to ground and ECM. I don't have a harness for the clutch switch, so I need to rig the switch to go into the fuse box in the engine bay. (If this is wrong please correct me)

The clutch switch has two contacts, so I assume I run two wires off of those contacts into the fuse box. My question is which wire goes where? Looking at the picture on the top of the 4th page of the pdf, I'm not entirely sure.

Correct on the clutch switch wiring. The clutch switch goes to the blue wire indicated below and the white wire, to pins to the right of the blue.

[Daren]

Originally Posted by CTScott

The clutch switch goes to the blue wire indicated below and the white wire, to pins to the right of the blue.

Thanks for the response! Checking to make sure I understand:
So both wires from the clutch switch splice into the blue wire and the white wire is moved to the right of the blue?

[CTScott]

Originally Posted by Daren

Thanks for the response! Checking to make sure I understand:
So both wires from the clutch switch splice into the blue wire and the white wire is moved to the right of the blue?

No, one wire from the clutch switch connects to the blue and the other connects to the white.

[Daren]

Thank you so much.

[r0chin]

Would this work on a 2009 Sedan?

[CTScott]

Originally Posted by r0chin

Would this work on a 2009 Sedan?

Yes:

http://www.yarisworld.com/forums/sho...ght=faq+cruise