Tanabe Sustec strut bar - Page 2 - Toyota Yaris Forums

Galavoxx · 03-21-2007, 08:07 PM

Quote:

Originally Posted by Kaotic Lazagna

i swear, sometimes i'll be driving in one lane, and a wind will blow and i find myself inbetween two lanes on the lines!

I had that problem too. I think ChinoCharles exaggerated a little. Lowering the car with the TRD absorbers helped my car tremendously. The body roll and cross wind effect is greatly reduced. Being so light, I still get blown around but it's not nearly as bad as it used to be.

C2AUTOSPL · 03-21-2007, 03:08 PM

might wanna get some better wheels or tires. If ou have all those susp mods without nice tires, its just meh lol

Kaotic Lazagna · 03-21-2007, 05:15 PM

Quote:

Originally Posted by C2AUTOSPL

might wanna get some better wheels or tires. If ou have all those susp mods without nice tires, its just meh lol

lol...just for looks...for now. i have to save up a lot more for new wheels and tires.

jim TS · 03-21-2007, 05:01 PM

i wonder if this strutbar also fits on the TS 1.8?
because the engine has more space necessary in altitude then 1.5 engine...

Kaotic Lazagna · 03-21-2007, 05:16 PM

Quote:

Originally Posted by jim TS

i wonder if this strutbar also fits on the TS 1.8?
because the engine has more space necessary in altitude then 1.5 engine...

hmmm, you can contact Tanabe and ask them if it will.

Kaotic Lazagna · 03-21-2007, 09:05 PM

...things can't be perfect. heh. i just don't like fighting the steering wheel a lot.

Kaotic Lazagna · 03-21-2007, 11:04 PM

well, i just got an email saying that the S.Tech's are being shipped from the manufacturer, so that's from Japan, right? bah, it's going to be a while before they get here...

C2AUTOSPL · 03-22-2007, 02:47 PM

It depends on where you order them from. There's TEIN USA. No small company from the US can order from TEIN Japan directly unless they have a middle man tuner shop in Japan who orders from TEIN Japan.

TEIN Japan will simply re-direct them to TEIN USA. Doesnt make any sense for anybody in the US to order from TEIN JAPAN when there's TEIN USA. :)

Kaotic Lazagna · 03-22-2007, 08:20 PM

Quote:

Originally Posted by C2AUTOSPL

It depends on where you order them from. There's TEIN USA. No small company from the US can order from TEIN Japan directly unless they have a middle man tuner shop in Japan who orders from TEIN Japan.

TEIN Japan will simply re-direct them to TEIN USA. Doesnt make any sense for anybody in the US to order from TEIN JAPAN when there's TEIN USA. :)

cool, so i guess the wait for them won't be too long. thanks for the info.

Kaotic Lazagna · 03-23-2007, 02:21 PM

it's for maximum efficiency of the strut bar, right?

Kaotic Lazagna · 03-23-2007, 02:30 PM

Quote:

Originally Posted by Chris07LB

Ive always been told just the opposite. Why is that?

Quote:

Originally Posted by Kaotic Lazagna

i think i read something like that on Tanabe's site...

Quote:

Originally Posted by Kaotic Lazagna

it's for maximum efficiency of the strut bar, right?

found it...i wasn't dreaming...

http://www.tanabe-usa.com/strutbars/default.asp

look at "adjustable preload" 2/3 down the page.

*Chris07LB* · 03-23-2007, 02:38 PM

Cant picture how it would help matters.. but maybe ill just edit my DIY post to reflect what Tanabe suggests.

Kaotic Lazagna · 03-23-2007, 02:53 PM

Quote:

Originally Posted by Chris07LB

Cant picture how it would help matters.. but maybe ill just edit my DIY post to reflect what Tanabe suggests.

oh, i dunno why i thought your Yaris was raised...wow, i think i've been on the laptop a little too long. maybe i should rest for a while...

*Chris07LB* · 03-23-2007, 03:23 PM

Raised?

Kaotic Lazagna · 03-23-2007, 04:08 PM

are you going to re-install it?

*Chris07LB* · 03-23-2007, 04:09 PM

Dude, what are you talking about???????????????

Kaotic Lazagna · 03-23-2007, 04:12 PM

my bad, i thought you knew that i was talking about your DIY install for the strut bar...

*Chris07LB* · 03-23-2007, 04:17 PM

Lol, you asked if I "raised" my car.... then asked if I was "going to re-install it.."

Yea, you were a little hard to follow... i still dont think I even know what your asking.

03-21-2007, 03:08 PM	#2
C2AUTOSPL Drives: 240sx, 00 Celica Join Date: Apr 2006 Location: Loma Linda, CA Posts: 691	might wanna get some better wheels or tires. If ou have all those susp mods without nice tires, its just meh lol __________________ SUPPORT YARISWORLD'S VERY FIRST SPONSOR!! C2 AUTOMOTIVE SPECIAL 24711 Redlands Blvd., Ste. I Loma Linda, CA 92354 T: 909-796-8189 E-mail: info@c2auto.com AIM: wide180sx

03-22-2007, 02:47 PM	#8
C2AUTOSPL Drives: 240sx, 00 Celica Join Date: Apr 2006 Location: Loma Linda, CA Posts: 691	It depends on where you order them from. There's TEIN USA. No small company from the US can order from TEIN Japan directly unless they have a middle man tuner shop in Japan who orders from TEIN Japan. TEIN Japan will simply re-direct them to TEIN USA. Doesnt make any sense for anybody in the US to order from TEIN JAPAN when there's TEIN USA. :) __________________ SUPPORT YARISWORLD'S VERY FIRST SPONSOR!! C2 AUTOMOTIVE SPECIAL 24711 Redlands Blvd., Ste. I Loma Linda, CA 92354 T: 909-796-8189 E-mail: info@c2auto.com AIM: wide180sx

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tanabe Strut Tower Bar Install & Review [pics!]	Chris07LB	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	57	04-07-2022 08:46 AM
For Sale: Lexus GS Parts - L-Tuned Body Kit, TRD Strut Tower bar, 18"StaggeredWheels.	TRD_Yaris	Items for Sale by private party	6	05-06-2010 07:43 PM
NEW ITEM Tanabe Sustec Front strut bars	C2AUTOSPL	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	5	04-27-2007 10:54 PM
C-ONE Front Strut Tower Bar - Installed & Impressions (Pics to Come)	bigsky2	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	20	01-10-2007 07:53 PM
2006-2007 Yaris 4 Door Front Strut Bar AEM/DC Sport	KenAEM	General Yaris / Vitz Discussion	3	08-30-2006 10:43 PM

03-21-2007, 05:01 PM	#4
jim TS yaris TS 1.8 View User's Garage Drives: yaris ts 1.8 Join Date: Mar 2007 Location: The Netherlands Posts: 51	i wonder if this strutbar also fits on the TS 1.8? because the engine has more space necessary in altitude then 1.5 engine...

03-21-2007, 09:05 PM	#6
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	...things can't be perfect. heh. i just don't like fighting the steering wheel a lot.

03-21-2007, 11:04 PM	#7
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	well, i just got an email saying that the S.Tech's are being shipped from the manufacturer, so that's from Japan, right? bah, it's going to be a while before they get here...

03-23-2007, 02:21 PM	#10
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	it's for maximum efficiency of the strut bar, right?

03-23-2007, 02:38 PM	#12
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Cant picture how it would help matters.. but maybe ill just edit my DIY post to reflect what Tanabe suggests.

03-23-2007, 03:23 PM	#14
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Raised?

03-23-2007, 04:08 PM	#15
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	are you going to re-install it?

03-23-2007, 04:09 PM	#16
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Dude, what are you talking about???????????????

03-23-2007, 04:12 PM	#17
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	my bad, i thought you knew that i was talking about your DIY install for the strut bar...

03-23-2007, 04:17 PM	#18
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Lol, you asked if I "raised" my car.... then asked if I was "going to re-install it.." Yea, you were a little hard to follow... i still dont think I even know what your asking.