Please post pics of your Yaris with aftermarket rims here

[fender_boi]

R3 branded Rimz (15 inches)
Yokohama Tires

[06_hbyaris]

Here ya go



yes the car need a wash

[Micro]

Motegi Racing 16" Wheels with 205/45/16 Tires

[Kal-El]

Originally Posted by Micro

Motegi Racing 16" Wheels with 205/45/16 Tires

Nice wheels but those eyelids are very much illegal. Hope you don't use your car at night. They cover half the lights beam.

[Micro]

yea they are illegal... so is my exhaust and intake etc... i drive at night all the time... there is no noticeable difference at all.... the road in front of me is still lit up great and the high beams still work... no downside in my opinion

thanks for your concern though lol

[Kal-El]

Originally Posted by Micro

yea they are illegal... so is my exhaust and intake etc... i drive at night all the time... there is no noticeable difference at all.... the road in front of me is still lit up great and the high beams still work... no downside in my opinion

thanks for your concern though lol

Doesn't Cali do vehicle state inspections?

[toy_toronto]

very nice micro. could u give us some more info on your eyelids? (material, etc.)

thanks -toy

.

[Micro]

Originally Posted by toy_toronto

very nice micro. could u give us some more info on your eyelids? (material, etc.)

thanks -toy

.

sorry it took me so long to reply... well the eyelids were an experiment of mine trying different shapes and coverage areas to find the balance of looking great and not affecting the headlights performance.

i wont go into detail on measurements and everything (unless you want it) but basically they are simply 4 coats of paint... the first coat needs to be white (for a good reflective surface for the light to bounce off of back into the reflectors) then three coats of your average flat black paint... or whatever color you are going for

thanks for the compliment toy

[padre1964]

poor mans aftermarket rims

beauty rings $60
dust caps $10
gloss black paint $4
red valve caps $3
total $77

[toy_toronto]

Originally Posted by padre1964

poor mans aftermarket rims

beauty rings $60
dust caps $10
gloss black paint $4
red valve caps $3
total $77

looks very nice!

where can u get them rings? I bet they'd look even better if you lowered the car.

i've been tinking of doing the same and wondered how it would look when i go back to my all-season tires before this coming winter...

-toy

.

[padre1964]

15" Stainless Steel Wheel Beauty Trim Rings 1 3/4" Deep found on ebay

[33OH]

16 x 7.5 Kosei K1's +43 - gloss black with key lime branding, wrapped with 195/50/16 Falken ZE-329's. DF210's (lowered .5" in front) with 12mm hub spacers installed.

[fred_r34]

any rubbing problems with this set up?

[custom Lftback]

LOVE the rims Ryan. the lime accents really pop out. i have to get me some hub spacers, asap lol

[33OH]

Thanks Blaine! Yeah - I love the hub spacers, really sets the look for the whole car.

[Vitz Rs Modellista]

My 2010 JDM Vitz RS Modellista with

- Volk Racing RE30 By Rays Engineering
Front wheels: 16" x 7" ET 45 with 2010 Yokohama Earth-1 Tyre (205/45 ZR 16)
Rear wheels: 16" x 7" ET 33 with 2010 Yokohama Earth-1 Tyre (205/45 ZR 16)
- Rays Wheel Nuts

I know that some will say "the car needs to be lowered" but I am not sure I want to compromise my usability of carrying 4 people around Bangkok with a lot of pot holes and horrible road surface.

Further modification are posted in my introduction thread listed below

best

Tony


http://www.yarisworld.com/forums/showthread.php?t=30467

[KCALB SIRAY]

Monarch Nilo's
16x7 front +20, 3" lip
16x8 rear +20, 5" lip

[fnkngrv]

^ love the look...those would look hot with my car's color as well.