So my fog lights suddenly have stopped working for no reason at all. The ONLY thing I did was pull on the wires that connect to the fog light stalk a little (to get them through the firewall some more). I have checked EVERYTHING. The fuse is fine, the relay isn't the problem (I tried a brand new one), and the fogs light when I manually complete the connection on the relay. The coil is not receiving power, nor is the fog light stalk. After some probing on the relay the only part that receives power is the 12v feed, so this could be the problem. (?) I even cut the molex connector and manually connected all the pins to confirm it wasn't a contact problem. I am freakin baffled lmao... This setup has worked for 6 months. I'm not entirely sure what kit I have (it's similar to the Ebay brand though), but it has a yellow and black wire going to the stalk. I've tapped this spot to get my 12v:
Interestingly, I have that red wire and had it connected to the same spot, but when I was examining my harness recently it seemed that wire wasn't even connected to anything. Like I said, I've rechecked everything as well as the grounding points. Someone helpppppp lol