Problem removing front brake rotor

[jkuchta]

For like 30 min. I talked to a tech at Toyota Glendora this morning and hes said that one of both rotors sticking is pretty common, and that there are two M8 threaded holes in the rotor that I can use to force the rotor off of the spindle. I can't wait to try it!

[Kawika No Ka 'Oi]

Has anyone determined that M8 bolts will in FACT fit the threaded rotor holes?

Originally Posted by jkuchta

For like 30 min. I talked to a tech at Toyota Glendora this morning and hes said that one of both rotors sticking is pretty common, and that there are two M8 threaded holes in the rotor that I can use to force the rotor off of the spindle. I can't wait to try it!

[CTScott]

Originally Posted by Kawika No Ka 'Oi

Has anyone determined that M8 bolts will in FACT fit the threaded rotor holes?

I have a couple of bolts that I use, but I don't have access to them at the moment to check. Most Japanese cars use M8x1.25, but for some reason I want to say that the Yaris uses fine pitch (M8x1.0). Just buy yourself two of each to be safe.