Pics of my AFE intake install + questions

[LtNoogie]

Originally Posted by 1NZYaris1

You could remove the sensorand bracket , and twist the metal leg on it 90 deg, then losen the top 3" hose clip side it under and do hose clip up again.

The Spare bolt (M6X30mm and 2 washers are used if you did not remove the orginal airbox mounting bracket, theres a hole in the bottom of the AFE box that lines up with the bracket .
That's if you did not remove it ,when you removed original airbox .

The Toyota dealer must have removed that bracket when they originally installed my TRD CAI. I was wondering why I had so much loose hardware leftover.