HOW CAN I KEEP FOGHLIGHS ON WITH HIGH BEAM?

[rningonfumes]

http://www.toyotanation.com/forum/sh...ight+high+beam

From what I read, it's possible. The relay gets a signal from the low beams to tell it to send power to the fogs. If you can jump the signal to hook up to the high beams as well as the low beams, you might be able to just keep them on.

Homework for you is to find out how the relay is hooked up to the low beam, find the high beams and hook the two up.

[1NZYaris1]

Originally Posted by rningonfumes

http://www.toyotanation.com/forum/sh...ight+high+beam

From what I read, it's possible. The relay gets a signal from the low beams to tell it to send power to the fogs. If you can jump the signal to hook up to the high beams as well as the low beams, you might be able to just keep them on.

Homework for you is to find out how the relay is hooked up to the low beam, find the high beams and hook the two up.

If you are useing the factory combo stalk , for get about it .
but if you are useing the aftermarket set up installed into factory wiring it's quite easy , you need to remove one wire , do you have any photos of your instal (wire colors ) and where you wired them .