Afe intake feed back required. - Page 3 - Toyota Yaris Forums

1NZYaris1 · 12-29-2008, 10:59 PM

Well spotted ,

,toying with taking it off and painting the bar,
the same color as the car.

1NZYaris1 · 01-06-2009, 09:42 PM

AFE intake

arrived this afternoon , and know installed, and i love it

Thank you Garm .

and everyone else for there input.

nvidiaxtc · 01-12-2009, 04:13 PM

I want to get that intake but I'm worried about it getting wet and messing up the engine

1NZYaris1 · 01-12-2009, 04:44 PM

If you put a rubber seal on the car as per photo's or something similar
you will have no water problems at all , and the only thing the AFE intake does to the

car is make it way better , and sounds pretty cool under hard excelleration.

there goes my fuel economy

LtNoogie · 01-12-2009, 04:58 PM

Where did you get the moulding material to seal your bonnet? I am still getting water on my aFe filter when the car goes through the automatic car wash. She even threw a CEL about the MAF. I cleared it with the ScanGauge and the CEL did not come back. I will probably only seal the area near the intake.

cali yaris · 01-12-2009, 05:20 PM

you use the automatic car wash? I can't do that any more -- too low.

kou · 01-12-2009, 05:24 PM

Quote:

Originally Posted by LtNoogie

Where did you get the moulding material to seal your bonnet? I am still getting water on my aFe filter when the car goes through the automatic car wash. She even threw a CEL about the MAF. I cleared it with the ScanGauge and the CEL did not come back. I will probably only seal the area near the intake.

you could always make a lid for those rainy days or the carwash.

nvidiaxtc · 01-12-2009, 08:57 PM

Quote:

Originally Posted by 1NZYaris1

If you put a rubber seal on the car as per photo's or something similar
you will have no water problems at all , and the only thing the AFE intake does to the

car is make it way better , and sounds pretty cool under hard excelleration.

there goes my fuel economy

How did you do that? That's awesome

nvidiaxtc · 01-12-2009, 08:57 PM

Quote:

Originally Posted by kou

you could always make a lid for those rainy days or the carwash.

How did you do that?

1NZYaris1 · 01-12-2009, 09:59 PM

Quote:

Originally Posted by nvidiaxtc

How did you do that? That's awesome

The rubber seal is made by a local company in NZ and is shipped through out the world it cost's $14.00NZ per metre ($8.55US)you require 2 metre's for the job.
It has an adheasive backing similar too 3m and sticks like shit to a blanket,
providing the area is clean.
there are other options out there as well as seen on here in Yaris world ,
but if anyone wants this product i am more than happy to send it to you , but would be best if 3 or 4 people local to each other bought it as then only one package would need to be sent
Postage if anyone was interested would start at $9.00US for 2mtr's
$15.00US 4MTR's
$20.00US 6MTR's
$24.00US 8MTR'S
Hope this helps you all .

PHXDEMON · 01-12-2009, 10:08 PM

To all the people worried about the filter getting wet. I have had the AFE for a while and driven my car down the freeway in pouring rain with out sealing my hood. Popped the hood and not a drop of water on the filter. The auto car wash probably sprays hard enough that water sneaks under the cracks in the hood.

Clode · 01-27-2009, 05:08 PM

hi

the AFE intake is compatible with Yaris 1.8 TS??

thanks

CASTREX · 01-27-2009, 05:36 PM

Quote:

Originally Posted by Clode

hi

the AFE intake is compatible with Yaris 1.8 TS??

thanks

Is not compatible, as the pipe diameter and the MAF housing are different.

However, there is a possible option from AFE that would work on the 1.8.

We will be testing one in a couple of weeks to verify it fit correctly.

There is some info about it on the TS subforum

Clode · 01-27-2009, 07:00 PM

Quote:

Originally Posted by CASTREX

Is not compatible, as the pipe diameter and the MAF housing are different.

However, there is a possible option from AFE that would work on the 1.8.

We will be testing one in a couple of weeks to verify it fit correctly.

There is some info about it on the TS subforum

ok...

many thanks

mrbond · 01-28-2009, 11:08 PM

I have this installed on my car, and I love love the sound. Never had a problem with it getting wet. Ever.

1NZYaris1 · 03-20-2009, 08:25 PM

Just an update ,now that i have a Scanguage installed as well , thought
i would try to seal the AFE to drop intake tempater , by putting a higher rubber seal
closing the gap betwen the top of the AFE box and bonnet.
got about a 2-3 degrees drop in intake temp while driveing and appears to stay cooler while sitting at traffic lights.

01-12-2009, 04:58 PM	#41
LtNoogie View User's Garage Drives: '08 Bayou Blue LB AT Join Date: Oct 2008 Location: West Hills, CA Posts: 2,517	Where did you get the moulding material to seal your bonnet? I am still getting water on my aFe filter when the car goes through the automatic car wash. She even threw a CEL about the MAF. I cleared it with the ScanGauge and the CEL did not come back. I will probably only seal the area near the intake. __________________ aFe Intake \| Blitz Supercharger \| Megan Header \| TRD Exhaust \| NST Pulley Set TRD Shocks/Struts \| Tanabe NF210 Springs \| TRD Sway Bar \| Motegi TRAKLITE wheels \| Kuhmo Ecsta XS R1 Concepts slotted rotors \| Carbotech 1521 brake pads \| stainless steel brake lines \| Seibon vented carbon fiber hood

01-12-2009, 05:20 PM	#42
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	you use the automatic car wash? I can't do that any more -- too low. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Intake Installation	redyaris	DIY / Maintenance / Service	53	08-23-2014 06:34 AM
Bomz Ebay Intake - Partial Review	Split	Performance Modifications	11	11-19-2008 03:12 AM
Intake Systems Decision Maker..	Blenjar	Performance Modifications	25	09-15-2007 11:07 PM
HELP!!! I went back to the service center yesterday for the 7th time in 2 months!	Meldav86	General Yaris / Vitz Discussion	27	08-21-2007 10:04 PM
WR Secret Weapon Intake Dyno Tested..	WRLEO	Performance Modifications	70	05-17-2007 04:00 PM

12-29-2008, 10:59 PM	#37
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	Well spotted , ,toying with taking it off and painting the bar, the same color as the car.

01-12-2009, 04:13 PM	#39
nvidiaxtc View User's Garage Drives: Black 2009 3Dr Hatch Join Date: Jan 2009 Location: Hayward, CA Posts: 36	I want to get that intake but I'm worried about it getting wet and messing up the engine

01-12-2009, 04:44 PM	#40
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	If you put a rubber seal on the car as per photo's or something similar you will have no water problems at all , and the only thing the AFE intake does to the car is make it way better , and sounds pretty cool under hard excelleration. there goes my fuel economy

01-12-2009, 10:08 PM	#47
PHXDEMON View User's Garage Drives: 2007 Red Liftback Join Date: Oct 2008 Location: Phoenix, AZ Posts: 885	To all the people worried about the filter getting wet. I have had the AFE for a while and driven my car down the freeway in pouring rain with out sealing my hood. Popped the hood and not a drop of water on the filter. The auto car wash probably sprays hard enough that water sneaks under the cracks in the hood.

01-27-2009, 05:08 PM	#48
Clode Drives: Yaris in future Join Date: Jan 2009 Location: Italy Posts: 23	hi the AFE intake is compatible with Yaris 1.8 TS?? thanks

01-28-2009, 11:08 PM	#51
mrbond View User's Garage Drives: 2008 meteorite hatchback Join Date: Nov 2008 Location: Illinois Posts: 960	I have this installed on my car, and I love love the sound. Never had a problem with it getting wet. Ever.