NST (NonStopTuning) Pulleys. Info, Specs, User Data... - Page 22 - Toyota Yaris Forums

hatchbackkid82 · 04-03-2009, 03:24 PM

Sorry to be a NOOB, looking to buy a pulley kit what's the difference between the 10% Underdrive kit and the CR-lite pulley kit?

thebarber · 04-04-2009, 04:56 PM

i dont feel like reading the whole thread, but i put on my underdrive pulley yesterday and had to buy a new belt that was 355mm long vs the stock 360mm....

belt was too long otherwise...wouldnt get tension in it..

mine is a 3dr w/o air conditioning...

might be worth noting...

auxmike · 04-04-2009, 04:58 PM

No A/C? I thought it came standard?

NonStopTuning · 04-05-2009, 05:31 AM

Quote:

Originally Posted by hatchbackkid82

Sorry to be a NOOB, looking to buy a pulley kit what's the difference between the 10% Underdrive kit and the CR-lite pulley kit?

You can read through the many pages of this thread, as your questions have been answered many times, in much detail.

Short version...

If you plan to stay naturally aspirated you should use
NST09010 plus NST09025K

If you plan to go supercharged you should use
NST09158 plus NST09025K

We are currently sold out of our crank pulleys (till May 2009), but you should be able to order these pieces from MicroImageOnline.com

Good luck and have fun with all your projects

wsladaritz · 04-05-2009, 09:22 AM

Hey thx for the info!

YarisSedan · 04-05-2009, 12:32 PM

Thanks to garm at microimage and of course to NST hopefully will have pics of them installed tomorrow. The quality of these look superb

YarisSedan · 04-05-2009, 01:16 PM

BTW does anyone happen to have the torque specs for the bolt for the altenator pulley.

RogueYaris · 04-07-2009, 02:43 AM

I sent NST a pm about 9 days ago and haven't received a response yet. Either way, I was wondering about how long it would take a dealership to install one of these?

ruimond · 04-07-2009, 02:51 AM

Quote:

Originally Posted by RogueYaris

I sent NST a pm about 9 days ago and haven't received a response yet. Either way, I was wondering about how long it would take a dealership to install one of these?

My mechanic installed my underdrive pulley for me, took him about 45mins-1hour. Wasn't very long.

RogueYaris · 04-07-2009, 02:54 AM

Thanks for the quick reply ruimond. My dealership only charges $40 an hour on accessories and these actually fall under that category.

hatchbackkid82 · 04-07-2009, 08:26 AM

Just ordered mine today. Can't wait to get them

aucorium · 04-07-2009, 09:42 AM

hey guys , had mine on my 1300cc 2nzfe ncp91 yaris for a while already , acyually almost 2 years i think , so far , no problems , still goes really well , guys cant believe how my little car goes , will put a clip on some time to show you.BIG UP NST!!!

NonStopTuning · 04-07-2009, 11:45 PM

Quote:

Originally Posted by RogueYaris

I sent NST a pm about 9 days ago and haven't received a response yet. Either way, I was wondering about how long it would take a dealership to install one of these?

I don't believe I received this PM. Either way, installation should require less than an hour by a pro mechanic.

Good luck and have fun with all your projects!

NonStopTuning · 04-07-2009, 11:46 PM

Quote:

Originally Posted by aucorium

hey guys , had mine on my 1300cc 2nzfe ncp91 yaris for a while already , acyually almost 2 years i think , so far , no problems , still goes really well , guys cant believe how my little car goes , will put a clip on some time to show you.BIG UP NST!!!

Thank you sir

thebarber · 04-08-2009, 12:12 AM

Quote:

Originally Posted by thebarber

i dont feel like reading the whole thread, but i put on my underdrive pulley yesterday and had to buy a new belt that was 355mm long vs the stock 360mm....

belt was too long otherwise...wouldnt get tension in it..

mine is a 3dr w/o air conditioning...

might be worth noting...

any comment from NST?

NonStopTuning · 04-08-2009, 02:48 AM

Quote:

Originally Posted by thebarber

any comment from NST?

I'm not quite sure what type of comment would be warranted here.

Unfortunately we have never tested with any Yaris that did not have a/c. And as far as I can tell, you are our first ever customer to use one of these pulleys on a Yaris that has no a/c.

Based on past experiences with other cars I can see how you may need a slightly shorter belt with your setup and it sounds like you have found your solution.

Buying a new belt is a small price to pay in exchange for picking up a few extra ponies

Any other owners out there running around with no a/c, please feel free to comment.

thebarber · 04-08-2009, 11:38 AM

Quote:

Originally Posted by NonStopTuning

I'm not quite sure what type of comment would be warranted here.

Unfortunately we have never tested with any Yaris that did not have a/c. And as far as I can tell, you are our first ever customer to use one of these pulleys on a Yaris that has no a/c.

Based on past experiences with other cars I can see how you may need a slightly shorter belt with your setup and it sounds like you have found your solution.

Buying a new belt is a small price to pay in exchange for picking up a few extra ponies

Any other owners out there running around with no a/c, please feel free to comment.

i was just hoping it could be noted somewhere that a new belt is req'd if you don't have a/c

i realize it wont come up too often, but itll save a lot of running around for someone doing the next install

xbalance · 04-10-2009, 11:07 PM

guys do any of you all notice the engine Vibration increase abit after install pulley set?

Most easy notice is during idle time...

04-04-2009, 04:56 PM	#380
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	i dont feel like reading the whole thread, but i put on my underdrive pulley yesterday and had to buy a new belt that was 355mm long vs the stock 360mm.... belt was too long otherwise...wouldnt get tension in it.. mine is a 3dr w/o air conditioning... might be worth noting... __________________

04-04-2009, 04:58 PM	#381
auxmike Drives: 2008 HB, A/T, Power W/L/M Join Date: Oct 2008 Location: LI, New Yawk Posts: 2,063	No A/C? I thought it came standard? __________________ Never take eyes off opponent - Bruce Lee

04-07-2009, 09:42 AM	#390
aucorium AKA Samurai Racer Drives: Yaris 2006 Join Date: Jul 2006 Location: South Africa Posts: 834	hey guys , had mine on my 1300cc 2nzfe ncp91 yaris for a while already , acyually almost 2 years i think , so far , no problems , still goes really well , guys cant believe how my little car goes , will put a clip on some time to show you.BIG UP NST!!! __________________ JDMtuner Import Performance Tuning www.jdmtuner.co.za

04-03-2009, 03:24 PM	#379
hatchbackkid82 Drives: . Join Date: Apr 2007 Location: . Posts: 1,828	Sorry to be a NOOB, looking to buy a pulley kit what's the difference between the 10% Underdrive kit and the CR-lite pulley kit?

04-05-2009, 09:22 AM	#383
wsladaritz Y4R1Z View User's Garage Drives: Yaris LB Join Date: Jul 2007 Location: Benton, AR Posts: 219	Hey thx for the info!

04-05-2009, 12:32 PM	#384
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	Thanks to garm at microimage and of course to NST hopefully will have pics of them installed tomorrow. The quality of these look superb

04-05-2009, 01:16 PM	#385
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	BTW does anyone happen to have the torque specs for the bolt for the altenator pulley.

04-07-2009, 02:43 AM	#386
RogueYaris View User's Garage Drives: 2015 Abs Red Join Date: Nov 2006 Location: JAX Posts: 374	I sent NST a pm about 9 days ago and haven't received a response yet. Either way, I was wondering about how long it would take a dealership to install one of these?

04-07-2009, 02:54 AM	#388
RogueYaris View User's Garage Drives: 2015 Abs Red Join Date: Nov 2006 Location: JAX Posts: 374	Thanks for the quick reply ruimond. My dealership only charges $40 an hour on accessories and these actually fall under that category.

04-07-2009, 08:26 AM	#389
hatchbackkid82 Drives: . Join Date: Apr 2007 Location: . Posts: 1,828	Just ordered mine today. Can't wait to get them

04-10-2009, 11:07 PM	#396
xbalance Drives: stock Join Date: Apr 2009 Location: malaysia Posts: 41	guys do any of you all notice the engine Vibration increase abit after install pulley set? Most easy notice is during idle time...