Can we do this? (aka The DIY Cruise Control Thread)

[Shroomster]

^^^that is the stalk that's installed


and this BELOW, is what an O.E.M toyota cruise stalk looks like...





courtesy of a toyotanation.com DIY

[1NZYaris1]

So does this need to be run through the clock spring
if so does that mean we have to replace it as well.
just a thougt ,and probably a bad one.

[lunjiaow]

Originally Posted by Shroomster

^^^that is the stalk that's installed


and this BELOW, is what an O.E.M toyota cruise stalk looks like...





courtesy of a toyotanation.com DIY

Well i just pulled my yaris airbag/horn out... and turns out to be like the picture above.

[Klink10]

Originally Posted by PK198105

how hard is it tho pull off the cover? i a bit scared of taking it off since i dont want my airbag to blow up in my face

Pulling the cover was a piece of cake. Changed out my steering wheel to a Scion and the install took me 20 minutes. To disable the airbag, I disconnected the battery the night prior. Check here on the forum, I can't for the life of me remember who did this first but they did a good write up on how to. It really pointed out battery disconnect and prying the wires for complete airbag removal.