Can we do this? (aka The DIY Cruise Control Thread)

[nickhjort]

Ok i see that now that I look at the pic. You had one more white one in with the brown one huh? And I see I was looking at the wrong side of the connector...duh. Anyway I'm gunna try that other pin in the ecm and try again tomorrow. Thanks a lot we'll see what happens :)

[CTScott]

Originally Posted by nickhjort

Ok i see that now that I look at the pic. You had one more white one in with the brown one huh? Anyway I'm gunna try that other pin in the ecu and try again tomorrow. Thanks a lot we'll see what happens :)

Sorry about the confusion on that. I didn't realize until I dropped the pic on the computer that the white I meant was hidden and the other white was right there in the foreground.

I was just tracing the 7.5A IGN fuse and I think that the pin you are on, on the ECM, is hot, so when you hit the switch it grounded it and popped the fuse, as that fuse feeds parts of the ECM.

By the way, before you road test with the correct pin, try the ON button in the driveway to be safe. I can hit the on with the ignition on and engine off and the cruise light comes on. Obviously you won't be able to tell if cruise is actually working, but at least you'll know if you pop a fuse.