HID - Page 12 - Toyota Yaris Forums

OgDogg · 09-13-2007, 10:34 PM

Quote:

Originally Posted by Chris07LB

I did adjust the lights down just a hair (half a turn counter clockwise), just because i "thought" they might be a little high.

Anyone got a picture of exactly where this headlight adjustment is? Or perhaps someone would care to post a DIY to help keep the roads a little safer. :)

OgDogg · 09-16-2007, 10:07 PM

FYI, on the sedan it's an 8mm nut you have to tighter/loosen in order to adjust the headlights vertically.

uncleyaris · 09-16-2007, 10:16 PM

After trying just to change blubs, I be afraid to install HID's, it's so tight for space. Are the instructions that come with most kits easy to follow? IS it a big job?

slvryaris · 09-17-2007, 12:51 AM

Still kickin around the idea of hid's. Who all has the bi beam kit and what is the brand and do they fit ok without any modding of the assembly?

OgDogg · 09-17-2007, 10:32 AM

I have the hi beam kit and it fits perfectly. You just have to turn the rubber piece behind the bulb inside out to fit the larger bulb casing.

As far as installation goes... It's just as easy as changing the light bulbs only you have the added step of mounting the ballasts.

slvryaris · 09-18-2007, 04:42 AM

What does everyone think of these kits on EBay??

http://cgi.ebay.com/ebaymotors/HID-B...spagenameZWDVW

http://cgi.ebay.com/ebaymotors/XENON...spagenameZWDVW

I know low price soooo........Has anyone had problems with the Bi beam fitting. I Imagine they would all be of correct size and not oversized.

driver centric · 09-19-2007, 09:07 PM

Quote:

Originally Posted by slvryaris

What does everyone think of these kits on EBay??

http://cgi.ebay.com/ebaymotors/HID-B...spagenameZWDVW

http://cgi.ebay.com/ebaymotors/XENON...spagenameZWDVW

I know low price soooo........Has anyone had problems with the Bi beam fitting. I Imagine they would all be of correct size and not oversized.

Hey, see my post at http://www.yarisworld.com/forums/showthread.php?t=8922.

I tested a bi-xenon kit from Xenonlink.com and it did not fit in my LB's headlight setup. The springs that hold the bulb in would not work with the HID bulb. I'm sending the kit back for a refund.

I have ordered another kit from xenithxenons.com, who have tested their bi-xenon kit on Scion xBs, which also use H4 and have a similar spring retaining system so hopefully this kit should be compatible with our cars.

I'll let you guys know what the results are.

slvryaris · 09-26-2007, 12:47 AM

Did anyone ever figure out how to adjust the headlight??? Or do you just tuen that 8mm nut?

*Chris07LB* · 09-26-2007, 06:07 AM

Pop your hood.. look for a black round barrel on the inside (engine side) of the light housings, with a white + in the center.. thats your adjuster.

slvryaris · 09-26-2007, 07:28 AM

Right on. I posted the comment when i was at work and in a hurry. I just checked the manual online and seen it, but for some reason I couldnt find it before. I guess I will try to lower the headlights before I give up on the HID's until someone starts selling retrofitted headlight assemblys so I dont have to mess with it. Also Chris I was curious how you have the stock assemblys and no one has flashed you. Is it in the bulb for some people like with the glare shields or de people re aim??? I just have no idea how people have HID's without retrofitting or lowering the assemblys.

Violin · 09-26-2007, 07:31 AM

This here:

slvryaris · 09-26-2007, 08:34 AM

Sedan is different. Just went outside andfound it. It looks like a light grey wheel with a 8mm nut in the middle. I just turned it clockwise and lowered my lights. Looks a 100 times better.

Soccer_Yaris · 02-28-2009, 01:13 PM

I am now returning the 8000K hid lights back to the store. After installing the lights I found out that I cannot have these lights working on my car with the DRL module. In Canada its the law to have DRL ( Daytime running lights). It would be a $360 ticket without it. So I contacted the supplier and he told me to return it. Thats $300 bucks back in my wallet!

Uaaurelia · 05-07-2009, 07:26 PM

anyone know what to do with the yellow wires for the halogen on the top, where to connect them too?

*Chris07LB* · 05-07-2009, 07:31 PM

When you unplugged your halogen bulb, the connector should have 3 wires in it.. is this what you are talking about?

Uaaurelia · 05-08-2009, 07:30 AM

Quote:

Originally Posted by Chris07LB

When you unplugged your halogen bulb, the connector should have 3 wires in it.. is this what you are talking about?

i bought the High/low H4 kit, came with a halogen bulb for the high beam. it came with two yellow wires for the halogen light bulbs. i dont know where to wire them too

ham · 05-08-2009, 09:09 AM

Quote:

Originally Posted by 07yaris_fe

anyone install HID kit to 2007 Yaris???
I'm having problem with the HID kit that i have.
I got a H4 HID kit it work but my DRL have problem
anyone can tell me how to disable the DRL?
Once I release handbrake, the light keep flashing........
so how i'm driving with my HID on all the time =(

please help!!!!!!!!!!!!!!!!!!! THANKS

That sounds all kinds of messed up.
Send me a link for your kit or a copy of the wiring diagram and I'll solve your problem. I also have a 2007.

Uaaurelia · 05-11-2009, 06:24 AM

Quote:

Originally Posted by ham

That sounds all kinds of messed up.
Send me a link for your kit or a copy of the wiring diagram and I'll solve your problem. I also have a 2007.

Quote:

Originally Posted by Uaaurelia

i bought the High/low H4 kit, came with a halogen bulb for the high beam. it came with two yellow wires for the halogen light bulbs. i dont know where to wire them too

yea me too. i got the High/low HID kit. when I connect the yellow wires from the halogen light (high beam). i get the flashing lights from both high and low beams.

i dont know if i connected the yellow wires right. Anyone knows where to plug/wire the yellow wires to or a pic of the wiring??

09-16-2007, 10:07 PM	#200
OgDogg Gas Guzzler View User's Garage Drives: 07 Yaris Sedan S Join Date: Dec 2006 Location: Phoenix, AZ Posts: 81	FYI, on the sedan it's an 8mm nut you have to tighter/loosen in order to adjust the headlights vertically.

09-16-2007, 10:16 PM	#201
uncleyaris View User's Garage Drives: 2007 Bayou Blue!!!!!!! Join Date: Nov 2006 Location: Toronto Posts: 1,523	After trying just to change blubs, I be afraid to install HID's, it's so tight for space. Are the instructions that come with most kits easy to follow? IS it a big job?

09-17-2007, 12:51 AM	#202
slvryaris View User's Garage Drives: 2007 Yaris Sedan S Join Date: May 2006 Location: Indiana Posts: 885	Still kickin around the idea of hid's. Who all has the bi beam kit and what is the brand and do they fit ok without any modding of the assembly?

09-17-2007, 10:32 AM	#203
OgDogg Gas Guzzler View User's Garage Drives: 07 Yaris Sedan S Join Date: Dec 2006 Location: Phoenix, AZ Posts: 81	I have the hi beam kit and it fits perfectly. You just have to turn the rubber piece behind the bulb inside out to fit the larger bulb casing. As far as installation goes... It's just as easy as changing the light bulbs only you have the added step of mounting the ballasts.

09-18-2007, 04:42 AM	#204
slvryaris View User's Garage Drives: 2007 Yaris Sedan S Join Date: May 2006 Location: Indiana Posts: 885	What does everyone think of these kits on EBay?? http://cgi.ebay.com/ebaymotors/HID-B...spagenameZWDVW http://cgi.ebay.com/ebaymotors/XENON...spagenameZWDVW I know low price soooo........Has anyone had problems with the Bi beam fitting. I Imagine they would all be of correct size and not oversized.

09-26-2007, 12:47 AM	#206
slvryaris View User's Garage Drives: 2007 Yaris Sedan S Join Date: May 2006 Location: Indiana Posts: 885	Did anyone ever figure out how to adjust the headlight??? Or do you just tuen that 8mm nut?

09-26-2007, 06:07 AM	#207
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Pop your hood.. look for a black round barrel on the inside (engine side) of the light housings, with a white + in the center.. thats your adjuster.

09-26-2007, 07:28 AM	#208
slvryaris View User's Garage Drives: 2007 Yaris Sedan S Join Date: May 2006 Location: Indiana Posts: 885	Right on. I posted the comment when i was at work and in a hurry. I just checked the manual online and seen it, but for some reason I couldnt find it before. I guess I will try to lower the headlights before I give up on the HID's until someone starts selling retrofitted headlight assemblys so I dont have to mess with it. Also Chris I was curious how you have the stock assemblys and no one has flashed you. Is it in the bulb for some people like with the glare shields or de people re aim??? I just have no idea how people have HID's without retrofitting or lowering the assemblys.

09-26-2007, 08:34 AM	#210
slvryaris View User's Garage Drives: 2007 Yaris Sedan S Join Date: May 2006 Location: Indiana Posts: 885	Sedan is different. Just went outside andfound it. It looks like a light grey wheel with a 8mm nut in the middle. I just turned it clockwise and lowered my lights. Looks a 100 times better.

02-28-2009, 01:13 PM	#211
Soccer_Yaris Drives: Toyota Yaris RS Join Date: Feb 2009 Location: Toronto Posts: 3	I am now returning the 8000K hid lights back to the store. After installing the lights I found out that I cannot have these lights working on my car with the DRL module. In Canada its the law to have DRL ( Daytime running lights). It would be a $360 ticket without it. So I contacted the supplier and he told me to return it. Thats $300 bucks back in my wallet!

05-07-2009, 07:26 PM	#212
Uaaurelia Drives: Yaris RS Hatchback Join Date: May 2009 Location: Vancouver Posts: 6	anyone know what to do with the yellow wires for the halogen on the top, where to connect them too?

05-07-2009, 07:31 PM	#213
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	When you unplugged your halogen bulb, the connector should have 3 wires in it.. is this what you are talking about?