FS: Lotsa stuff off my car

[33OH]

Originally Posted by KCALB SIRAY

Ryan, is it the inside portion of the scoops that are causing the hood to lift on the right side or is it due to the fiberglass cure/settle? And were you able to get a measurement of the inside of the scoop to the engine?

It's due to the fiberglass cure/settle, but by fiberglassing the scoops together it forces the hood into a better shape. And the hood is at my dad's shop, haven't had a chance to go there and measure the scoop size. If you PM Garm, he has the hoods with him at his shop and should be able to measure it faster than I would.

[KCALB SIRAY]

Originally Posted by ryank

It's due to the fiberglass cure/settle, but by fiberglassing the scoops together it forces the hood into a better shape. And the hood is at my dad's shop, haven't had a chance to go there and measure the scoop size. If you PM Garm, he has the hoods with him at his shop and should be able to measure it faster than I would.

My only concern is if it will clear the Blitz with the scoops so low. If it will, I'll take yours. It's an easy fix and I can lower it even further with a few tricks if needed. It won't show as much with my color anyway.