Taking to next level and eliminate understeer - Toyota Yaris Forums

largeorangefont · 05-25-2009, 08:19 PM

Jack up the car, take off the front wheel, break loose both nuts that hold the strut to the hub. Remove the upper bolt, keep the lower one in place. Put in the camber bolt in the upper hole, torque both bolts to spec, replace the wheels and go get an alignment.

All that said, the camber won't help you a whole lot. You need a bigger rear sway bar, and/or stiffer rear springs and more air pressure in the rear.

Do not remove the front sway bar. Your problems will only get worse.

05-25-2009, 08:19 PM	#24
largeorangefont Break'em off some. View User's Garage Drives: 07 Yaris LB, 04 Cobra Join Date: Jan 2007 Location: So Cal, OC Posts: 854	Jack up the car, take off the front wheel, break loose both nuts that hold the strut to the hub. Remove the upper bolt, keep the lower one in place. Put in the camber bolt in the upper hole, torque both bolts to spec, replace the wheels and go get an alignment. All that said, the camber won't help you a whole lot. You need a bigger rear sway bar, and/or stiffer rear springs and more air pressure in the rear. Do not remove the front sway bar. Your problems will only get worse.