Teaser pics - Page 2 - Toyota Yaris Forums

lilredrocket · 07-24-2009, 01:06 PM

Sorry I was refering to some of the systems the have the nozzle in the end of the come filter. not much option to put it behind the MAF then. Like this one.

http://www.compperformancegroupstore...rAirAmplifiers

saplaymate · 07-24-2009, 01:10 PM

Quote:

Originally Posted by 2bad4u

Step 5: Install Nitrous Nozzle
Optimum nozzle placement is 6” to 18” from the throttle body. This range of distance gives the nitrous
and air proper time to mix before entering the intake manifold plenum. Remember, nitrous nozzles
must always be mounted after the mass airflow sensor, never before them. After you have determined
where to mount the nitrous nozzle

Lilredrocket this is from the installation manual on Zex site it states "nitrous nozzles must always be mounted after the mass airflow sensor, never before them"

That's for a wet set-up

2bad4u · 07-24-2009, 01:12 PM

Quote:

Originally Posted by lilredrocket

Sorry I was refering to some of the systems the have the nozzle in the end of the come filter. not much option to put it behind the MAF then. Like this one.

http://www.compperformancegroupstore...rAirAmplifiers

I like this set up much better

Tamago · 07-24-2009, 01:34 PM

i ran a 35 wet shot on the xA before i went on boost. it was fun.. but as previously stated, a wideband o2 should be on your list of things to buy before you get spray happy. i'm contemplating a dry 75 shot on the xA right now, since i have my FIC and large injectors already installed.

lilredrocket · 07-24-2009, 01:40 PM

Are you going to frankinstine the kit like your turbo kit? (not saying its a bad thing.) I'm really thing about doing a 30 dry shot like the OP. I have started saving links for a turbo kit too!!

Tamago · 07-24-2009, 01:41 PM

Quote:

Originally Posted by lilredrocket

Are you going to frankinstine the kit like your turbo kit? (not saying its a bad thing.) I'm really thing about doing a 30 dry shot like the OP. I have started saving links for a turbo kit too!!

what do you mean frankenstein?

like "not buying the components from the same manufacturer"?

i already have a bottle that fits nicely under the airbag cover so i'll probably use it again.

lilredrocket · 07-24-2009, 01:52 PM

Exactly. Like for the turbo set up I would like to buy the HKS but I think I'll be able to piece one together for cheaper

ROCKLAND TOYOTA · 07-24-2009, 02:57 PM

what happened to that turbo sponsorship?

2004javablack · 07-27-2009, 01:36 AM

i have a cold air intake, light wheight crank pulley, that is about in 4 performance mods.

2004javablack · 07-27-2009, 01:37 AM

and a axel back exhaust.

07-24-2009, 01:06 PM	#19
lilredrocket Slowy getting there View User's Garage Drives: 08 Liftback Join Date: Nov 2008 Location: DFW, Texas Posts: 1,464	Sorry I was refering to some of the systems the have the nozzle in the end of the come filter. not much option to put it behind the MAF then. Like this one. http://www.compperformancegroupstore...rAirAmplifiers __________________

07-24-2009, 01:40 PM	#23
lilredrocket Slowy getting there View User's Garage Drives: 08 Liftback Join Date: Nov 2008 Location: DFW, Texas Posts: 1,464	Are you going to frankinstine the kit like your turbo kit? (not saying its a bad thing.) I'm really thing about doing a 30 dry shot like the OP. I have started saving links for a turbo kit too!! __________________

07-24-2009, 01:52 PM	#25
lilredrocket Slowy getting there View User's Garage Drives: 08 Liftback Join Date: Nov 2008 Location: DFW, Texas Posts: 1,464	Exactly. Like for the turbo set up I would like to buy the HKS but I think I'll be able to piece one together for cheaper __________________

07-24-2009, 02:57 PM	#26
ROCKLAND TOYOTA TRIM HUNTER View User's Garage Drives: 2007 BLAZIN BLUE YARIS 3 DR Join Date: May 2006 Location: ROCKLAND COUNTY NY Posts: 2,088	what happened to that turbo sponsorship? __________________ http://rocklandtoyota.com/IFrame.aspx?iFrameID=2388 TOYOTA PARTS AT A DISCOUNT........

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
teaser pics from japanese trip :)	enviri	Off-topic / Other Cars / Everything else Discussions	29	04-07-2009 03:33 AM
TRD spring install pics	tristan	Photo-Video-Media Gallery	10	02-20-2009 11:33 PM
Deals Gap pics	HTM Yaris	Photo-Video-Media Gallery	3	05-15-2007 07:02 PM
Turbo Kit Teaser Pics	cdydjded	Performance Modifications	27	01-31-2007 01:58 AM

07-27-2009, 01:36 AM	#27
2004javablack View User's Garage Drives: Lift Back Join Date: Sep 2006 Location: Bolingbrook, IL Posts: 5	i have a cold air intake, light wheight crank pulley, that is about in 4 performance mods.

07-27-2009, 01:37 AM	#28
2004javablack View User's Garage Drives: Lift Back Join Date: Sep 2006 Location: Bolingbrook, IL Posts: 5	and a axel back exhaust.